Toshiba TOSVERT VF-FS1 Series instruction manual Status LED, Fault LED, LED on LED OFF, Off

Page 8

E6581373

2.2.2. Status LED

It displays node status with green color. LIU007Z does not have this LED.

1

Continues to

be OFF

2

Continues to

be ON

3

Repeats ON

and OFF

4

Repeats ON

and OFF

5

Repeats ON

and OFF

6

Repeats ON

and OFF

Power				1		2	Time (second)
ON				LED ON		LED OFF
ON


No				LED state			Description
1	Although the inverter is turned						No power
1	on, LED remains OFF.						No power
	on, LED remains OFF.
2	LED continues to be ON after						The LONWORKS option unit is running in normal mode
	the inverter is turned on.
3	LED flashes every 1 second.						There is no connection to the LONWORKS network
4	LED flashes every 0.25 second.						The LONWORKS option unit has received a Wink command. It
							continues for 30 second.
5	Repeats 3 flashing and OFF for						These phenomenon occurs when the fault LED turning ON.
5	1 second.						CPU or Internal application program is abnormal. If the same
	1 second.
6	Repeats 2 flashing and OFF for						indication appears after resetting the power, it needs to be
6	1 second.						repaired.
	1 second.						repaired.

The phone numbers for a service call are listed on the back cover of the inverter instruction manual or on its catalog.

2.2.3. Fault LED

It displays fault with red color. LIU007Z does not have this LED.

LED state	Description
OFF	LONWORKS option unit has no fault.
ON	Hardware or software fault of the LONWORKS option unit
	The LONWORKS option unit does not communicate with the inverter.
Flashing	If the same indication appears after resetting the power, it needs to be
	repaired.

- 7 -

Image 8

Contents E6581373 Introduction Handling in generalTable of Contents E6581373 System configuration ScopeOverview Applicable modelNames and functions of main parts Outline viewLIU006Z LIU007Z for VF-FS1LED DiagnosticsService LED Fault LED Status LEDLED on LED OFF OFFRS485 communication port Configurations Service pin Device interface XIF fileInverter configurations Neuron IDCommand & Setpoint selection Local/Remote LIU007ZReference parameter of the inverter Object id Functional profileFunctional profile supported by this option Network variables Node Object Node Object functional blockObject map NciLocation Location Label NviRequest Object RequestNvoStatus Object Status ACMotorDrive functional block Object map is the followingNetwork variable list VSD601011 LIUNetwork variable list the other NciMinSpeed Minimum Speed Configuration propertiesNciMaxSpeed Maximum Speed NciMinOutTm Minimum Send Time NciRcvHrtBt Receive Heartbeat TimeNciSndHrtBt Send Heartbeat Time NciRampUpTm Ramp Up Time NciNmlSpeed Nominal Motor Speed in min-1NciNmlFreq Nominal Motor Frequency NciRampDownTm Ramp Down Time NciDrvSpeedScale Default value for nviDrvSpeedScaleNciPwUpOutTm Power up delay time NviResetFault Fault Reset Command Input network variablesNviDrvSpeedStpt Drive Speed Setpoint NviDrvSpeedScale Drive Speed Setpoint ScalingNviInvSetFreq Frequency Setpoint NviRelay1 /nviDigitalOut1,2 Control of Digital OutputNviDigitalOutput Control of All Digital Outputs LIU007Z LIU006ZNviAnalogOut1,2 Control of Analog output NviEmergOverride Emergency stopNviParamCmd Parameter access LnrecallLnlearncurrent LnlearnvalueOutput network variables NvoStatusWord Inverter Status NvoDrvAlarm AlarmNvoDrvFeedback Velocity Feedback NvoAlarmWord Alarm Status NvoDrvThermal Drive Thermal StateNvoMotorThermal Motor Thermal State NvoTorque Motor Torque MonitorNvoDigitalIn1 to 8 Digital Input Monitor NvoDrvEnergy Cumulative Input EnergyNvoDigitalInput All Digital Inputs Monitor NvoAnalogIn1 to 3 Analog Input Monitor NvoEmergStatus Emergency StatusNvoParamResp Parameter Access Response NvoTypeVer IdentificationAscii ToshibaProcedure Option unit reset methodExample usage BindingCommunication health management Parameter access method E6581373 Specifications ANSI/EIA/CEA