Toshiba TF831/861 manual Connection to Pabx, Obtaining a public line

Installation

A

PSTN

SET EXCHANGE TYPE

1.PSTN

2.PABX

Select a menu item

Press STOP, return to standby mode

		STOP
Connection to PABX,	B	PABX
obtaining a public line

SET EXCHANGE TYPE

The TF 861 can be connected not only to the public switched telephone network (public line) but also to a PABX. In this case, additional parameters have to be entered.

With PABXs, the public line is obtained in various ways:

1.PSTN

2.PABX

Select a menu item

• Number	Dial one digit (or several
	digits) in order to obtain
	the public line
• Earth key	Earth potential is con-
	nected to the line in
	order to obtain the public
	line.
• Flash key	With this method of
	obtaining the public line,
	the connection circuit is
	interrupted briefly.

When the method of obtaining a public line has been entered,

you must always press the key "*" before the actual number when you dial your fax partner. This is also applicable for saving the fax numbers (see page 70ff).

SET ACCESS TYPE	Make your selection
1.EARTH
2.FLASH
3.DIGIT

SET ACCESS TYPE	Select a menu item
	Example: digit

SET ACCESS TYPE

ACCESS DIGIT = (1-3)

n

Enter the digit(s) for obtaining public line

Example: 0

SET ACCESS TYPE

ACCESS DIGIT = (1-3)

0

Confirm with START

START

Press STOP, return to standby mode

STOP

TF 831/861 TOSHIBA Installation 15 GB