Yamaha YSP-900 owner manual Using Auto Setup IntelliBeam, 29 En, Center line, Optimizer microphone

Center line

AUTO SETUP (IntelliBeam)

Using AUTO SETUP (IntelliBeam)

Once the optimizer microphone is firmly connected to this unit and properly placed in your listening room, follow the procedure below to start the AUTO SETUP procedure.

You can also enter the AUTO SETUP procedure simply by pressing and holding AUTO SETUP on the remote control for more than 2 seconds. In this case, this unit performs both of the beam optimization and sound optimization procedures.

Optimizer microphone

■Assembling the supplied cardboard

microphone stand

You will find three separate parts (one circular-shaped part
and two longitudinal-shaped parts) of the cardboard
microphone stand originally put together.	VOLUME + STANDBY/ON

12

34

1Disassemble the three parts of the cardboard microphone stand originally put together.

2Insert one of the longitudinal-shaped part into the crevice of the other longitudinal- shaped part.

3Place the circular-shaped part on top of the two combined longitudinal-shaped parts.

4Place the supplied optimizer microphone on top of the circular-shaped part.

STANDBY/ON	POWER	POWER
	AV	TV

STB	VCR	DVD		AUX
INPUT1		TV		MACRO
		INPUT2
TV
	AUTO	INPUTMODE		SLEEP
VOL MODE SETUP
5BEAM	ST+3BEAM		3BEAM
1		2		3
STEREO	MY BEAM SURROUND
4		5		6
MUSIC	MOVIE		SPORTS
7		8		9
OFF
0	+10
CH LEVEL				MENU

TV/AV

ENTER

YSP

TESTRETURN

SETUP

English

29 En