Yamaha YSP-900 owner manual 70 En

ADJUSTING THE AUDIO BALANCE

Note

SWFR is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 63).

3Press / to adjust channel volumes.

ENTER

Control range: –10 dB to +10 dB

4Wait for a few seconds without operating this unit when you have completed your adjustment.

Notes

•All the channel levels cannot be adjusted when the stereo playback is selected as the beam mode (see page 46).

•FRONT L/R cannot be adjusted when the stereo plus 3 is selected as the beam mode (see page 41).

•Only CENTER can be adjusted when the my beam is selected as the beam mode (see page 47).

•FRONT L/R are automatically adjusted depending on the settings of the other channels when the stereo plus 3 beam or stereo playback is selected as the beam mode (see pages 41 and 46).

y

If the level of a particular channel cannot be adjusted, – –dB appears in the front panel display.

70 En