CONTROLS AND FUNCTIONS
HTV POWER
Turns on the power of the TV or sets it to the standby mode (see page 78).
IAV POWER
Turns on the power of the selected component or sets it to the standby mode (see pages 78 and 79).
JINPUT1/INPUT2
Selects the input source of the TV (see page 78).
KMACRO
Use to set the TV macro (see page 80).
LSLEEP
Sets the sleep timer (see page 55).
MINPUTMODE
Switches between input modes (AUTO, DTS or ANALOG). See page 71 for details.
NBeam mode buttons
Change the beam mode settings (see pages 40, 46 and 47).
OSURROUND
Selects the surround mode for playback (see page 40).
PMY BEAM
Use to select the my beam as the beam mode (see page 48).
Q TruBass
Use to effectively reproduce the bass sound (see page 54).
RMENU
Displays the setup menu on your TV monitor (see pages 29 and 58).
Displays the DVD menu. (S: TV/AV)
SOperation mode selector
Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating the TV or other AV components set up the appropriate remote control codes.
TRETURN
Use to select sleep timer settings or return to the previous SET MENU screen.
Use to return to the previous DVD menu screen or exit the DVD menu. (S: TV/AV)
UTV VOL +/–
Adjusts the volume level of the TV (see page 78).
VCH +/–
Switches between channels of the TV or the VCR (see pages 78 and 79).
WTV MUTE, CODE SET
Mutes the audio output of the TV (see page 78). Use to set up remote control codes (see page 77).