■Setting macros for the TV without the tuning capability
1Press and hold CODE SET on the remote control and then press one of the input selector buttons to select the input source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE | STB | VCR | DVD | AUX |
While holding |
|
|
| |
|
|
|
| |
| down, press |
|
|
|
CODE SET | TV |
|
|
|
2Press MACRO on the remote control while holding down CODE SET.
TV MUTE | While holding MACRO |
| down, press |
CODE SET |
|
3Press INPUT1 on the remote control.
INPUT1
4Press CH +/– or TV INPUT on the remote control repeatedly so that the screen changes to the display of the input source selected in step 1.
CH
TV INPUT
or
5Press ENTER on the remote control to confirm the setting.
ENTER
REMOTE CONTROL FEATURES
■Operating macros
1Set the operation mode selector to YSP to switch to the operation mode of this unit.
TV/AV
YSP
2Press and hold one of the input selector buttons for approximately 2 seconds to select the input source you want to operate macros for.
The TV input changes at the same time the input mode changes.
STB | VCR | DVD | AUX |
TV
■Canceling the macros
1Press and hold CODE SET on the remote control and then press one of the input selector buttons to select the input source you want to cancel the macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE | STB | VCR | DVD | AUX |
While holding |
|
|
| |
| down, press |
|
|
|
CODE SET | TV |
|
|
|
|
|
|
|
2 | Press MACRO on the remote control while | ADVANCED OPERATION |
| ||
| holding down CODE SET. |
|
| TV MUTE While holding MACRO |
|
| down, press |
|
| CODE SET |
|
3Press ENTER on the remote control to cancel the macros.
ENTER
English