Yamaha YSP-900 owner manual Adjusting the Audio Balance, Using the test tone, 68 En

ADJUSTING THE AUDIO BALANCE

You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience.

Using the test tone

You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use the test tone to set channel levels so that the volume level of each channel is identical when heard from your listening position.

OFF

0 +10

CH LEVEL MENU

TV/AV

ENTER

YSP

TESTRETURN

1Set the operation mode selector to YSP to switch to the operation mode of this unit.

TV/AV

YSP

3Press / to select the channel you want to adjust.

The front panel display changes as follows.

TEST FRONT L

ENTER TEST CENTER

TEST FRONT R

TEST SUR.R

TEST SUR.L

TEST SWFR

Note

TEST SWFR is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 63).

2Press TEST on the remote control.

4Press / to adjust channel volumes.

TEST FRONT L appears in the front panel display and a test tone is output from the front left channel.

TEST

VOL

TEST FRONT L

ENTER

Control range: –10 dB to +10 dB

68 En