DISPLAY MENU
Use to manually adjust various parameters related to the display.
SET MENU → MANUAL SETUP → DISPLAY MENU
4 DISPLAY MENU
. A)DIMMER SET
B)OSD SET
C)UNIT SET
[p]/[p]:Up/Down [ENTER]:Enter
■DIMMER SET (Dimmer settings)
Use to adjust the brightness of the front panel display.
A)DIMMER SET
. STANDARD DIMMER;;;;;OFF
AUTO DIMMER
;;;;;;;;;;;;;OFF
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
STANDARD DIMMER (Standard dimmer)
Use to adjust the brightness of the front panel display when you operate this unit by using the control buttons on the front panel or on the remote control.
Choices:
AUTO DIMMER (Auto dimmer)
If no operation is performed for a specified period, the front panel display dims. Use to adjust the brightness of the front panel display in this case.
Choices: OFF (the same brightness as the STANDARD DIMMER setting),
MANUAL SETUP
■OSD SET (OSD settings)
Use to adjust the display position and the background color of the OSD.
B)OSD SET
. OSD SHIFT;;;;;;;;0
OSD BACK COLOR;;;BLUE
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust towards the – (minus) direction to raise the position of the OSD, and adjust towards the + (plus) direction to lower it. Choices:
Initial setting: 0
OSD BACK COLOR (OSD background color)
Use to select the background color of the OSD. Choices: BLUE, GRAY
■UNIT SET (Unit settings)
Use this to change the display unit of measurement. Choices: METERS, FEET
C)UNIT SET
pMETERS | FEET |
[p]/[p]:Select [ENTER]:Return
•Select METERS to input distances in meters.
•Select FEET to input distances in feet.
Note
If you change this setting, the adjusted beam settings may change.
OPERATION | ADVANCED |
English