Yamaha YSP-900 owner manual Using the audio output being played back, 69 En

Page 71

5Press TEST when you have completed all your adjustments.

TEST

Notes

All the channel levels cannot be adjusted when the stereo playback or my beam is selected as the beam mode (see pages 46 and 47).

FRONT L/R cannot be adjusted when the stereo plus 3 beam is selected as the beam mode (see page 41).

FRONT L/R are automatically adjusted depending on the settings of the other channels when the stereo plus 3 beam or stereo playback is selected as the beam mode (see pages 41 and 46).

y

If the level of a particular channel cannot be adjusted, – –dB appears in the front panel display.

ADJUSTING THE AUDIO BALANCE

Using the audio output being played back

You can also manually adjust the channel levels while playing back an input source such as a DVD.

OFF

0 +10

CH LEVEL

MENU

TV/AV

ENTER

YSP

TESTRETURN

1Set the operation mode selector to YSP to switch to the operation mode of this unit.

TV/AV

YSP

2Press CH LEVEL repeatedly (or press CH LEVEL and then / ) to select the channel you want to adjust.

The front panel display changes as follows.

CH LEVEL

or

CH LEVEL

ENTER

OPERATION

ADVANCED

FRONT L +1.0dB

CENTER -2.5dB

FRONT R +1.0dB

SUR.R +2.0dB

SUR.L +2.0dB

SWFR --dB

English

69 En

Image 71
Contents YSP-900 For U.K. Customers Contents Overview Features Using this Manual Yellow Optimizer microphone ⋅1 Orange Audio pin cable ⋅1 Supplied AccessoriesRemote control ⋅1 STANDBY/ON Controls and FunctionsFront panel InputFront panel display OUT Rear panelVCR TV/STB Subwoofer Video AUX Remote control 10 En 11 En InstallationBefore installing this unit Installing this unitExample Installation examples12 En 13 En Using a metal wall bracketUsing a stand Using a rackDVD player Subwoofer Connections14 En Audio connection Video connectionCables used for connections Connecting a TV15 En Digital and analog audio connections Video connections16 En Connecting a DVD player/recorderAudio Input Optical Coaxial Connecting a VCR17 En DVDOutput Rear panel of this unit Connecting a digital satellite tuner or a cable TV tuner18 En 19 En Connecting other external components20 En Connecting a subwooferTo the AC outlet Connecting the power supply cable21 En Getting Started Installing batteries in the remote controlOperation range of the remote control Close the battery cover23 En Using the remote control Turning on the powerOperational buttons only when YSP is Selected Front panel Remote controlFront panel Using SET MenuDisplaying the OSD 24 En25 En Flow chart of SET MenuChanging OSD Language Language SetupPress Menu on the remote control Press / to select Language Setup and then press EnterBeam optimization Sound optimization Flow chart of Auto Setup27 En 28 En Installing the optimizer microphoneCenter line Using Auto Setup IntelliBeam29 En Assembling the supplied cardboard Microphone stand30 En Auto SetupBEAM+SOUND Optimz 31 EnExample Show Result32 En 33 En Error messages for Auto SetupBefore the Auto Setup procedure starts While the Auto Setup procedure is in progress34 En Using the System MemorySaving settings Convenient usage of the system memoryPress Enter again Loading settingsSET Menu 35 EnPress / to select Load and then press 36 En37 En Remote control operationsPlayback Selecting the input source38 En Playing back sources39 En Adjusting the volumePress Mute on the remote control to mute the sound Muting the sound40 En Press 5BEAM on the remote control to select the 5 beamEnjoying Surround Sound Beam41 En Press 3BEAM on the remote control to select the 3 beamStereo plus 3 beam Beam Surround modes and recommended sources Decoder indicatorsStatus Indicator 42 En43 En Enjoying 2-channel sourcesSurround sound Select the TV channel you want to watch Press TV on the remote control44 En 45 En Adjusting surround mode parametersWhen Dolby Pro Logic II Music is selected When DTS Neo6 Music is selected46 En Enjoying Stereo SoundStereo playback My beam microphone Using auto-adjust function47 En 48 En Using manual-adjust functionPress MY Beam on the remote control Press / while MY Beam is displayed to adjust the angleElements of a sound field Using Sound Field ProgramsWhat is a sound field? 49 EnSports program 50 EnMusic program Movie program51 En Press / on the remote control52 En Using the Volume ModeEffect.LvlMIN Effect.LvlMID Effect.LvlMAX 53 En54 En Press on the remote control55 En Using the Sleep TimerDisappears Canceling the sleep timer56 En 57 En Manual Setup58 En Using Manual SetupManual Setup 2BEAM Menu Asetting Parameters 1/3Setting parameters Installed Position Installed position of this unitHorizontal Angle Horizontal angle Bbeam AdjustmentBeam Adjustment Beam adjustment 60 EnFront left channel 61 EnBeam Travel Length Beam travel length Focal Length Focal lengthImage Location Image location Cimage Location62 En Subwoofer SET Subwoofer set 1SOUND Menu63 En Tone Control Tone control64 En Daudio DelayCmute Level Eroom EQ65 En Binput ModeInput Menu Cinput TrimPress / to select the desired character 66 EnInput Rename Input rename Cunit SET Display MenuAdimmer SET Bosd SET68 En Adjusting the Audio BalanceUsing the test tone Press / to select the channel you want to adjust69 En Using the audio output being played backPress Test when you have completed all your adjustments 70 En DTS Selecting the Input Mode71 En Auto72 En Adjusting System ParametersUsing the system parameters Setting the Memory Protect73 En Setting the MAX VolumePress / to switch between Protect on Protect OFF Press / to adjust the maximum volume level74 En Setting the Turn on VolumeSetting the Demo Mode Press / to adjust the initial volume level75 En Setting the Factory PresetPress / to switch between Demo on Demo OFF 76 En Press / to switch between Preset Reset and Preset CancelCode SET Remote Control FeaturesSetting remote control codes 77 EnOperating your DVD player Controlling other components78 En Operating your TVCATV/Satellite tuner Set the operation mode selector to TV/AV79 En Operating your VCR Operating your STB80 En Using the TV macroSetting macros for the TV with the tuning capability Operating macros Setting macros for the TV without the tuning capabilityCanceling the macros 81 EnGeneral Troubleshooting82 En 83 En 84 En Remote control85 En GlossaryAudio formats Audio information86 En IndexSpeaker Section Specifications87 En AMP SectionDVD Player VCRSatellite Tuner Cable TV TunerWH83000-1 On the upper shelf to keep it away from the floor Cables used for connectionsEnjoying surround sound