4Press / to switch between PROTECT: ON
and PROTECT: OFF.
ENTER
VOL
PROTECT: ON
VOL
PROTECT: OFF
•Select PROTECT: ON to activate the protection feature.
•Select PROTECT: OFF to deactivate the protection feature.
5Press STANDBY/ON on the front panel to set this unit to the standby mode.
STANDBY/ON
The new setting will be activated when you turn on the power of this unit next time.
Setting the MAX VOLUME
You can set the maximum volume level so that this unit will not output sound beyond the limited volume level.
1Repeat steps 1 to 3 in “Using the system parameters” on page 72.
2Set the operation mode selector to YSP to switch to the operation mode of this unit.
TV/AV
YSP
ADJUSTING SYSTEM PARAMETERS
3Press / on the remote control so that MAX VOLUME SET is shown in the front panel display.
ENTER
VOL
MAX VOLUME SET
4Press ENTER.
ENTER
5Press / to adjust the maximum volume level.
ENTER
Control range: MAX, 99 to 01, MIN
Control step: 1
6Press STANDBY/ON on the front panel to set this unit to the standby mode.
STANDBY/ON
The new setting for the maximum volume level will be activated when you turn on the power of this unit next time.
OPERATION | ADVANCED |
|
|
English