Yamaha YSP-900 owner manual Using this Manual

Page 6

USING THIS MANUAL

Notes

•This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner’s manual for the component.

•Some operations can be performed by using either the buttons on the main unit or on the remote control. In such cases, the operation is described using remote control operation.

•yindicates a tip for your operation.

•This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority.

1Install this unit in your listening room.

See “INSTALLATION” on page 11.

2Connect this unit to your TV and other external components.

See “CONNECTIONS” on page 14.

3Prepare the remote control and turn on the power of this unit.

See “GETTING STARTED” on page 22.

4Run AUTO SETUP.

See “AUTO SETUP (IntelliBeam)” on page 27.

5Play back a source.

See “PLAYBACK” on page 37.

6Change the beam modes and/or CINEMA DSP settings.

See “ENJOYING SURROUND SOUND” on page 40.

If you want to make additional settings and adjustments

7Run MANUAL SETUP to fine-tune settings and/or set remote control codes.

See “MANUAL SETUP” on page 57 and “REMOTE CONTROL FEATURES” on page 77.

4 En

Image 6

Contents YSP-900 For U.K. Customers Contents Overview Features Using this Manual Supplied Accessories Remote control ⋅1Yellow Optimizer microphone ⋅1 Orange Audio pin cable ⋅1 Input Controls and FunctionsFront panel STANDBY/ONFront panel display Rear panel VCR TV/STB Subwoofer Video AUXOUT Remote control 10 En Installing this unit InstallationBefore installing this unit 11 EnInstallation examples 12 EnExample Using a rack Using a metal wall bracketUsing a stand 13 EnAudio connection Video connection Connections14 En DVD player SubwooferDigital and analog audio connections Video connections Connecting a TV15 En Cables used for connectionsConnecting a DVD player/recorder 16 EnDVD Connecting a VCR17 En Audio Input Optical CoaxialConnecting a digital satellite tuner or a cable TV tuner 18 EnOutput Rear panel of this unit Connecting other external components 19 EnConnecting a subwoofer 20 EnConnecting the power supply cable 21 EnTo the AC outlet Close the battery cover Installing batteries in the remote controlOperation range of the remote control Getting StartedFront panel Remote control Using the remote control Turning on the powerOperational buttons only when YSP is Selected 23 En24 En Using SET MenuDisplaying the OSD Front panelFlow chart of SET Menu 25 EnPress / to select Language Setup and then press Enter Language SetupPress Menu on the remote control Changing OSD LanguageFlow chart of Auto Setup 27 EnBeam optimization Sound optimization Installing the optimizer microphone 28 EnAssembling the supplied cardboard Microphone stand Using Auto Setup IntelliBeam29 En Center lineAuto Setup 30 En31 En BEAM+SOUND OptimzShow Result 32 EnExample While the Auto Setup procedure is in progress Error messages for Auto SetupBefore the Auto Setup procedure starts 33 EnConvenient usage of the system memory Using the System MemorySaving settings 34 En35 En Loading settingsSET Menu Press Enter again36 En Press / to select Load and then pressSelecting the input source Remote control operationsPlayback 37 EnPlaying back sources 38 EnMuting the sound Adjusting the volumePress Mute on the remote control to mute the sound 39 EnBeam Press 5BEAM on the remote control to select the 5 beamEnjoying Surround Sound 40 EnPress 3BEAM on the remote control to select the 3 beam Stereo plus 3 beam Beam41 En 42 En Decoder indicatorsStatus Indicator Surround modes and recommended sourcesEnjoying 2-channel sources Surround sound43 En Press TV on the remote control 44 EnSelect the TV channel you want to watch When DTS Neo6 Music is selected Adjusting surround mode parametersWhen Dolby Pro Logic II Music is selected 45 EnEnjoying Stereo Sound Stereo playback46 En Using auto-adjust function 47 EnMy beam microphone Press / while MY Beam is displayed to adjust the angle Using manual-adjust functionPress MY Beam on the remote control 48 En49 En Using Sound Field ProgramsWhat is a sound field? Elements of a sound fieldMovie program 50 EnMusic program Sports programPress / on the remote control 51 EnUsing the Volume Mode 52 En53 En Effect.LvlMIN Effect.LvlMID Effect.LvlMAXPress on the remote control 54 EnUsing the Sleep Timer 55 EnCanceling the sleep timer 56 EnDisappears Manual Setup 57 EnUsing Manual Setup Manual Setup58 En Installed Position Installed position of this unit Asetting Parameters 1/3Setting parameters 2BEAM Menu60 En Bbeam AdjustmentBeam Adjustment Beam adjustment Horizontal Angle Horizontal angleFocal Length Focal length 61 EnBeam Travel Length Beam travel length Front left channelCimage Location 62 EnImage Location Image location Tone Control Tone control 1SOUND Menu63 En Subwoofer SET Subwoofer setEroom EQ Daudio DelayCmute Level 64 EnCinput Trim Binput ModeInput Menu 65 En66 En Input Rename Input renamePress / to select the desired character Bosd SET Display MenuAdimmer SET Cunit SETPress / to select the channel you want to adjust Adjusting the Audio BalanceUsing the test tone 68 EnUsing the audio output being played back Press Test when you have completed all your adjustments69 En 70 En Auto Selecting the Input Mode71 En DTSSetting the Memory Protect Adjusting System ParametersUsing the system parameters 72 EnPress / to adjust the maximum volume level Setting the MAX VolumePress / to switch between Protect on Protect OFF 73 EnPress / to adjust the initial volume level Setting the Turn on VolumeSetting the Demo Mode 74 EnSetting the Factory Preset Press / to switch between Demo on Demo OFF75 En Press / to switch between Preset Reset and Preset Cancel 76 En77 En Remote Control FeaturesSetting remote control codes Code SETOperating your TV Controlling other components78 En Operating your DVD playerOperating your VCR Operating your STB Set the operation mode selector to TV/AV79 En CATV/Satellite tunerUsing the TV macro Setting macros for the TV with the tuning capability80 En 81 En Setting macros for the TV without the tuning capabilityCanceling the macros Operating macrosTroubleshooting 82 EnGeneral 83 En Remote control 84 EnAudio information GlossaryAudio formats 85 EnIndex 86 EnAMP Section Specifications87 En Speaker SectionVCR DVD PlayerCable TV Tuner Satellite TunerWH83000-1 Cables used for connections On the upper shelf to keep it away from the floorEnjoying surround sound