ADJUSTING SYSTEM PARAMETERS
This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to adjust and customize the way this unit operates.
Using the system parameters |
|
|
| 3 Release INPUT on the front panel. | |
|
|
|
Follow the procedure below to enter the system parameters.
INPUT
INPUT | VOLUME + | STANDBY/ON |
CH LEVEL | MENU |
TV/AV
ENTER
YSP
TESTRETURN
Setting the MEMORY PROTECT
You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed.
1Repeat steps 1 to 3 in “Using the system parameters” on this page.
2Set the operation mode selector to YSP to switch to the operation mode of this unit.
TV/AV
YSP
1Press STANDBY/ON on the front panel to turn off the power of this unit.
STANDBY/ON
2Press and hold INPUT on the front panel and then press STANDBY/ON on the front panel to turn on the power of this unit.
MEMORY PROTECT is shown in the front panel display.
INPUT | STANDBY/ON |
3Confirm that MEMORY PROTECT is shown in the front panel display and then press
ENTER.
VOL
MEMORY PROTECT
ENTER
VOL
MEMORY PROTECT