USING THE SYSTEM MEMORY
Convenient usage of the system memory
You can save the current settings adjusted in SET MENU in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment. For example, if there are curtains in the path of beams, the effectiveness of the beams will vary depending on whether the curtains are open or closed.
When the curtains are | When the curtains are | ||
open | closed | ||
|
|
|
|
|
|
|
|
Saving settings
1Set the operation mode selector to YSP to switch to the operation mode of this unit.
TV/AV
YSP
2Press MENU on the remote control.
The SET MENU screen appears on your TV.
MENU |
| SET MENU | |
. | ;MEMORY | ||
| |||
|
| ;AUTO SETUP | |
|
| ;MANUAL SETUP | |
|
| ;LANGUAGE SETUP | |
|
| [p]/[p]:Up/Down | |
|
| [ENTER]:Enter |
3Press 
/ 
to select MEMORY and then press ENTER.
The following screen appears on your TV.
ENTER | ENTER |
;MEMORY
. 1)LOAD 2)SAVE
[p]/[p]:Up/Down [ENTER]:Enter
4Press 
/ 
to select SAVE and then press
ENTER.
The following screen appears on your TV.
ENTER | ENTER |
1)MEMORY SAVE
p | MEMORY1 |
| MEMORY2 |
| MEMORY3 |
[p]/[p]:Select [ENTER]:Enter
y
•The control buttons used for SET MENU are displayed on the bottom of the screen.
•To return to the previous screen while using SET MENU, press RETURN on the remote control.
•To cancel the SET MENU screen, press MENU once more.
•You can also perform the following operations in the front panel display.