Yamaha YSP-900 owner manual 2BEAM Menu, Asetting Parameters 1/3, 59 En, Setting parameters

BEAM MENU

Use to manually adjust various parameters related to the sound beam output.

SET MENU → MANUAL SETUP → BEAM MENU

2)BEAM MENU

. A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION

MANUAL SETUP

•Select FLAT TO WALL if this unit is installed in parallel with the wall in your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit and the distance of the center of this unit from the left wall.

Listening position from the left wall

[p]/[p]:Up/Down [ENTER]:Enter

y

You can adjust the sound beam output level of each channel in

Room length

Listening position from the unit

“ADJUSTING THE AUDIO BALANCE” (see page 68).

■SETTING PARAMETERS

(Setting parameters)

Use to set the position of this unit in your listening room and the distance of this unit from the listening position. When you make settings for each parameter, other related parameters are automatically adjusted to best match your listening environment.

Note

If you make adjustments in SETTING PARAMETERS, the beam optimization settings made in the AUTO SETUP procedure will be lost. If you want to keep the beam optimization settings made in the AUTO SETUP and make further adjustments, adjust settings in BEAM ADJUSTMENT first (see page 60).

Room width

Choices for the room width and length: 2.0 m to 12.0 m

Choices for the listening position from this unit: 1.8 m to 9.0 m

Choices for the listening position from the left wall: 0.6 m to 11.4 m

	A)SETTING PARAMETERS 2/3
Room width and length		-------[ 5.4m ]-
		4.9m
	[p]/[p]:Up/Down [p]/[p]:Sel
		[ENTER]:Return

A)SETTING PARAMETERS 1/3	A)SETTING PARAMETERS 3/3
. INSTALLED POSITION
;;;;;FLAT TO WALL
Listening position from the		--------
unit and the left wall		2.7m [ 2.5m ]
[p]/[p]:Up/Down [p]/[p]:Sel
[ENTER]:Return
	[p]/[p]:Up/Down [p]/[p]:Sel
		[ENTER]:Return

INSTALLED POSITION (Installed position of this unit)

Use to adjust the installed position of this unit.

Choices: FLAT TO WALL (Parallel to wall installation),

ANGLE TO WALL OR CORNER (Corner installation)

FLAT TO WALL	ANGLE TO WALL
	OR CORNER

OPERATION ADVANCED

English

59 En