REMOTE CONTROL FEATURES
Using the TV macro
The TV macro feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a DVD, you would normally turn on the component, select DVD as the input source and press the play button to start playback. The TV macro feature lets you perform all of these operations simply by pressing the DVD macro button.
Notes
•Be sure to set up a remote control code for your TV before setting macros.
•The ways to set macros differ if your TV does not have the tuning capability.
•If you press any control buttons on the remote control other than the ones used to set macros while setting macros, the setting procedure is automatically canceled.
•If it takes more than 10 seconds in steps 2 and 3, the setting procedure is automatically canceled. In this case, repeat from step 1.
■Setting macros for the TV with the tuning capability
1Press and hold CODE SET on the remote control and then press one of the input selector buttons to select the input source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE | STB | VCR | DVD | AUX |
| While holding |
|
|
|
| down, press |
|
|
|
CODE SET | TV |
|
|
|
2Press MACRO on the remote control while holding down CODE SET.
TV MUTE | While holding | MACRO |
|
| |
| down, press |
|
CODE SET |
|
|
STANDBY/ON | POWER | POWER |
| AV | TV |
3Press CH +/– or the numeric buttons to select the TV channel.
Check that the TV screen changes to the tuner screen.
STB | VCR | DVD |
| AUX |
INPUT1 | TV |
| MACRO | |
INPUT2 | ||||
TV |
|
|
|
|
| AUTO | INPUTMODE | SLEEP | |
VOL MODE SETUP | ||||
5BEAM | ST+3BEAM | 3BEAM | ||
1 |
| 2 |
| 3 |
STEREO | MY BEAM SURROUND | |||
4 |
| 5 |
| 6 |
MUSIC | MOVIE | SPORTS | ||
7 |
| 8 |
| 9 |
OFF |
|
|
|
|
0 | +10 |
|
|
CH | 5BEAM | ST+3BEAM | |
1 | 2 | ||
| |||
| STEREO | MY BEAM | |
or | 4 | 5 | |
| MUSIC | MOVIE | |
| 7 | 8 | |
| OFF |
|
0 +10
3BEAM
3
SURROUND
6
SPORTS
9
CH LEVEL | MENU |
TV/AV
ENTER
YSP
TESTRETURN
VOLUME | CH | TV VOL |
MUTE | TV INPUT TV MUTE |
CODE SET
4Press TV INPUT on the remote control repeatedly so that the screen changes to the display of the input source selected in step 1.
TV INPUT
5Press ENTER on the remote control to confirm the macro setting.
ENTER