![](/images/new-backgrounds/1156685/15668525x1.webp)
1. Introduction and Installation
5Turn the gear with the blue core (1) in the direction of the arrow.
1
LMake sure that the ink film is wrapped around the blue core (2) at least once.
Correct
2
1turn
Tight
Incorrect
The ink film is not wrapped around the blue core.
Slack/Crease
Reverse
6First close the back cover securely (1) by pushing down on the dotted area at both
ends (2). Then close the front cover securely (3).
2
1
3
1.5.2 Replacing the ink film
To ensure that the unit operates properly, we recommend the use of Panasonic replacement film. See page 8 for accessory information.
LWe cannot be responsible for any damage to the unit or degradation of print quality which may occur from the use of
1Open the covers (see steps 1 to 3 on page 10).
2Remove the used core (1) and used ink film (2).
1
2
3Remove the stoppers (1) and tags (2) from the new ink film (3).
2
1
1
3
4Insert the ink film and close the covers (see steps 4 to 6 on page 10).
11