![](/images/new-backgrounds/1156685/15668523x1.webp)
1. Introduction and Installation
LTo select features or feature settings
during programming (page 42).
LTo navigate to the next operation.
U{MENU}
LTo initiate or exit programming.
V{COPY}
LTo initiate copying (page 33).
W{STOP}
LTo stop an operation or programming.
X{FAX/START}{SET}
LTo initiate fax transmission or reception. L To store a setting during programming.
1.5Ink film
1.5.1 Installing the ink film
Release the back cover by pushing the green lever (2) in the unit.
1
2
1Open the front cover (1) by pulling up the centre part (2).
3Open the back cover (1).
1
2
1
2Release the back cover by pushing the green button (1) on the right side of the unit.
OR
4Insert the gear with blue core of the front ink film roll (1) into the left slot of the unit (2). Insert the rear ink film roll (3).
L The ink film is safe to touch, and will not rub off on your hands like carbon paper.
1
3
2
10