Stopping a Transmission
To stop a transmission while it is in progress, follow the instructions below.
1.Press the STOP key twice. The display will show
STOPPED
2.If documents are stuck part way through the document feeder, you may see the following message on the display.
RELOAD DOCUMENT
Press the STOP key again. Your fax machine feeds the document the rest of the way through the document feeder.
Note: If your fax machine cannot feed your document through the document feeder, refer to Problem Solving.
Receiving Faxes Manually
Your fax machine receives faxes automatically unless the fax machine has been set to the manual receive [TEL] mode. If your fax machine is set to the manual receive [TEL] mode, follow the instructions below.
1.When your telephone or fax machine rings, pick up the telephone handset. If the call is a voice call, start speaking to the caller.
2.If the call is a fax call, or if a person wishes to fax you a document after having a conversation, press the START key and hang up the handset.
|
|
| Note: You can also tell your fax machine to start fax | English |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
| reception by entering your 2 digit code for remote receive |
|
|
|
|
| |
|
|
|
| |
|
|
| using your telephone keypad. Refer to Remote Receive. |
|
3. After you receive the fax, a long beep tells you that the |
| |||
|
|
| reception was successful. |
|
Receiving Faxes in Memory
Your fax machine automatically receives messages into memory and does not immediately print them in the following situations.
Memory Reception
When your fax machine has been set to Memory Reception mode [MEM], any received faxes are stored in the memory of your fax machine and are not automatically printed. The display shows MSG. IN MEMORY if any faxes have been received during memory reception mode.
When you change the reception mode of your fax machine, any
If you want to print any fax messages stored in memory without changing the reception mode, carry out the following:
1.Press the SELECT FUNCTION key.
User’s Guide | 39 |