GE D780 manual Double Ring

Page 82

	Name		Descriptions
	3.DRPD:SELECT FAX
	3.DRPD:SELECT FAX		Select a ring pattern when the machine receives faxes.
			(→ p. 5-5)
	NORMAL RING		Ring type of normal telephone line.
	DOUBLE RING		Two short rings at regular intervals.
	SHORT-SHORT-LONG		Short-short-long at regular intervals.
	SHORT-LONG-SHORT		Short-long-short at regular intervals.
	OTHER RING TYPE		Patterns other than those described above.
	4.INCOMING RING		When the machine is set to FaxOnly and Fax/Tel, set
			whether the machine rings when it receives a call.
	OFF		The machine does not ring when it receives a fax. (In
			energy saver mode, the fax may ring one or two times.)
	ON		The machine rings when it receives a fax if the handset
			or a telephone is connected.
	RING COUNT		Sets the number of incoming rings before the machine
			answers.
			1 to 99 TIMES (2 TIMES)
	5.MAN/AUTO SWITCH		Sets the machine to switch to document receive mode
			after ringing for a specified length of time in the manual
			receive mode.
	OFF		The machine keeps ringing until someone answers the
			call manually with the handset or a connected extension
			telephone.
	ON		F/T RING TIME: Sets the length of time to elapse
			before the machine switches to the document receiving.
			5 to 99 SEC (15 SEC)
	6.REMOTE RX		Receives from a remote telephone with preset setting.
	ON		Remote receiving is turned on.
	REMOTE RX ID		You can dial a number code on the remote extension to
			start receiving a document.
			A combination of two characters using 0 to 9, A and #
			(25) is possible.
	OFF		Remote receiving is turned off.

PRINTER SETTINGS			Sets the print functions.
	1.RX REDUCTION		Receives images at a reduced size.
	ON		Turn on image reduction.
	1.RX REDUCTION		AUTO SELECTION: Reducing size is set to auto.
			FIXED REDUCTION: Reducing size is preset.
		97%, 95%, 90%, 75%
	2.SELECT REDUCE DIR		VERTICAL ONLY: Reduction is performed in the vertical
			direction only.
			HORIZ & VERTICAL: Reduction is performed in the
			horizontal and vertical direction.
	OFF		Image reduction is turned off.
			(The factory default setting is in bold face.)

9

Setting the Additional Functions

9-7

Image 82

Contents Fax Guide Copyright Using Your DocumentationTrademarks Page Contents Setting the Additional Functions Special FeaturesTroubleshooting Appendix SpecificationsUsers in the U.S.A Pre-Installation Requirements for Canon Facsimile EquipmentConnection of the Equipment Rights of the Telephone Company Case of Equipment MalfunctionFCC Notice Users in Canada Order InformationFor Canadian Users Type Conventions Used in This Guide TX/RX noPage Customer Support IntroductionOperation Panel Fax Monitor Key Standby Display Connecting the Telephone Line and an External DeviceMaking Connections External Device Connections DrpdRegistering Information Guidelines for Entering Numbers, Letters and SymbolsMethods of Registering Information in the Machine Correcting a Mistake Letter you wantWhat is Sender Information? Registering Required Sender InformationRegistering Your Fax/Telephone Number and Name Entering the Date and TimePress Additional Functions Use 4 -or e + to select 2.UNIT Name Use 4 -or e + to select 7.PRINT ListsPress Set three times Setting the Telephone Line TypeUse 4 -or e + to select 2.TEL Page What is Speed Dialing? Speed DialingUse 4 -or e + to select 4.ADD One-Touch Speed DialingRegistering Numbers for One-Touch Speed Dialing Use 4 -or e + to select a one-touch speed dialing key 01 toTo Change a One-Touch Speed Dialing Entry Changing/Deleting a One-Touch Speed Dialing EntryTo Delete a One-Touch Speed Dialing Entry Use 4 -or e + to select 2.CODED Coded Speed DialingRegistering Numbers for Coded Speed Dialing Use 4 -or e + to select a coded speed dialing code 00 toChanging/Deleting a Coded Speed Dialing Entry To Change a Coded Speed Dialing EntryTo Delete a Coded Speed Dialing Entry Use 4 -or e + to select 3.GROUP Dial Group DialingCreating Groups To register a group under a one-touch speed dialing keyTo continue registering other groups, press Additional Functions then repeat the procedure from stepTo enter a destination registered for coded speed dialing If you want to delete one of these numbers from the groupUse 4 -or e + to select 2.SPEED Speed Dialing ListsPrinting Speed Dialing Lists Use 4 -or e + to select the list you want to printTouch Detail Press Set Use 4 -or e + to select 7.PRINT Canceling the Print Out ListUse 4 -or e + to select 3.CANCEL PressUse 4 -or e + to select on Registering a Password and SubaddressUse 4 -or e + to select Use 4 -or e + to select 2.TX TypeEnter a password Enter a subaddressPage Press FAX Resolution to select Press Set Adjusting the Quality of Your FaxesSetting the Scanning Resolution Sending FaxesRegular Dialing Dialing Methods5 7 9 5 1 1 1 One-Touch Speed Dialing Coded Speed DialingPress Directory Group DialingDirectory Dialing Press 4 -or e + to display the other namesMemory Sending Stop/Reset then pressSending Methods Dial the other party’s fax numberPress Set Dial the other party’s fax number Press FAX to set to Fax ModePress Function Press Book Sending Press Start to begin scanningPress Stop/Reset Canceling SendingCanceling memory sending Press Function Press Fax MonitorCanceling Automatic Redialing Redialing When the Line is BusyCanceling Manual Redialing Manual RedialingOne-touch speed dialing Sequential BroadcastingSending a Document to More Than One Destination Coded speed dialingPress Start Press Function Press Delayed Transmission Delayed SendingFunction and then Book Sending , Confirming Transmission Status Confirming Transmission Status and Sending ReservationConfirming Sending Reservation Press Function Documents Stored in MemoryPrinting a List of Documents in Memory Press Memory ReferenceUse 4 -or e + to select 4.RESEND Resending a Document in MemoryPress Function Press Memory Reference Enter the fax number Press SetPrinting a Document in Memory Use 4 -or e + to select 3.PRINTUse 4 -or e + to select 5.DELETE Deleting a Document from MemoryPress 4 -to delete the document Receiving Faxes Receive Mode Main Use Operation RequirementsDifferent Ways to Receive a Fax Press Receive Mode until the mode you Press Set Want appears Setting the Options for FaxTel Mode What Happens When FaxTel Mode is SelectedUse 4 -or e + to select 2.FAX/TEL OPT.SET Use 4 -or e + to select 4.RXUse 4 -or e + to select Receive or Types of Ring Patterns If you hear a person’s voice Receiving Faxes ManuallyIf you hear a slow beep tone or silence Registering a Password and Subaddress for Polling Use 4 -or e + to select Polling RXPolling RX 1.PASSWORD Password Press 4 -to cancel receiving Receiving Faxes in Memory When a Problem OccursCanceling Receiving Receiving While Performing Other TasksPage Special Dialing Special FeaturesDialing an Overseas Number With Pauses Switching Temporarily to Tone Dialing Report or List Reports and ListsSummary of Reports and Lists DescriptionActivity Report Press ReportTX Transmission Report Slerexe Company LimitedRX Reception Report Multi TX/RX Transaction ReportMessage TroubleshootingLCD Messages CauseYou cannot send a fax Faxing ProblemsSending Problems Faxes sent from the machine are spotted or dirtyErrors occur frequently while sending Receiving ProblemsCannot send using Error Correction Mode ECM Cannot receive a fax automaticallyCannot receive a document manually Cannot receive using Error Correction Mode ECMErrors occur frequently while receiving Print quality is poorYou cannot dial Telephone ProblemsIf a Power Cut Occurs Telephone disconnects while you are talkingIf You Cannot Solve the Problem Press Additional Functions to display the menus Setting the Additional FunctionsUnderstanding the Additional Functions Press 4 -or e + to select the menu you want to changeMenu Descriptions Name DescriptionsCopy Settings FAX Settings Print Error only Receive Double Ring RX to Memory ADD. Registration Timer Settings Specifications TelephonePage Canceling IndexDocument Memory List Memory Clear Report RX Report Standard Memo Canon Deutschland GmbH Canon Italia S.p.A