Agilent Technologies SMPTE 310M manual MPEGscope Plus and MPEGscope Lite

Page 13

MPEGscope Plus and MPEGscope Lite

5 Flip the two latches on the front sides of the computer cover upwards.

6Grasp the cover on the sides at the back of the computer and slide it forwards and off the computer.

5

Image 13

Contents Smpte 310M Interface Installation Guide Manual Name Copyright Warranty MPEGscope+61-3-8877-8633 Indicates that antistatic precautions should be taken Safety SymbolsCertification Additional Information for Test and Measurement EquipmentAvertissement Symboles de sécuritéIii Cet instrument est conforme auxPage Contents-1 ContentsPage Interface Printed Circuit Assembly E6292-66501 Interface Installation Guide E6292-94000Introduction Introduction Location Number MPEGscope Plus and MPEGscope Lite MPEGscope Plus and MPEGscope LiteRemove the cover MPEGscope Plus and MPEGscope Lite Remove optional interface MPEGscope Plus and MPEGscope Lite Install Smpte interface Remove the blank faceplate Install the Real-timeAnalyzer card into slot Into slotReplace the cover Smpte 310M interface installed in slot MPEGscope Portable and Portable Lite MPEGscope Portable and Portable LiteRemove the cover Tabs Remove optional interface Install Smpte interface Page Guide Plastic guide forSmpte 310M interface installed in slot Connecting to the Smpte 310M interface Connecting to the Smpte 310M interfaceDVB-SPI Tx To system under test Connect the ScsiConfiguring the software Configuring the softwarePage Select the Tx tab Configuring the software Select the Rx tabClose the dialog Between consecutive packets Smpte 310M interface specificationsCables on all interfaces Release Notes Release Notes