Agilent Technologies SMPTE 310M manual Install Smpte interface

MPEGscope Plus and MPEGscope Lite

Step 3: Install SMPTE interface

IMPORTANT: 1 Attach the antistatic wrist strap to your wrist and to the PC chassis as described in the instructions on the

envelope. Ensure that the copper foil end of this strap attaches to an electrical ground.

2Install the SMPTE 310M interface card into slot 3 and screw the faceplate to the PC chassis. (If this is the first interface installed into slot 3, you will have to remove the blank faceplate first.)

3If your MPEGscope has a Real-time Analyzer, reconnect the ribbon cable from the MPEGscope main card to the Real-time Analyzer card.

8