Agilent Technologies SMPTE 310M manual MPEGscope Plus and MPEGscope Lite

Page 15

5Remove the faceplate screw from slot 3 with the screwdriver provided, then remove the optional line interface.

MPEGscope Plus and MPEGscope Lite

6If your optional line interface is connected to the MPEGscope main card with a cable, disconnect the other end of the cable from the MPEGscope main card and remove the cable.

4If your optional line interface is connected to the MPEGscope main card with a cable, disconnect the cable from the optional interface card.

3If your MPEGscope has a Real-time Analyzer, disconnect the ribbon cable from the Real-time Analyzer card. The cable runs from the MPEGscope main card to the Real- time Analyzer card.

7

Image 15

Contents Smpte 310M Interface Installation Guide Copyright Warranty MPEGscope Manual Name+61-3-8877-8633 Additional Information for Test and Measurement Equipment Safety SymbolsIndicates that antistatic precautions should be taken CertificationAvertissement Symboles de sécuritéIii Cet instrument est conforme auxPage Contents-1 ContentsPage Introduction Interface Installation Guide E6292-94000Interface Printed Circuit Assembly E6292-66501 IntroductionLocation Number MPEGscope Plus and MPEGscope Lite MPEGscope Plus and MPEGscope LiteRemove the cover MPEGscope Plus and MPEGscope Lite Remove optional interface MPEGscope Plus and MPEGscope Lite Install Smpte interface Into slot Install the Real-timeRemove the blank faceplate Analyzer card into slotReplace the cover Smpte 310M interface installed in slot MPEGscope Portable and Portable Lite MPEGscope Portable and Portable LiteRemove the cover Tabs Remove optional interface Install Smpte interface Page Guide Plastic guide forSmpte 310M interface installed in slot To system under test Connect the Scsi Connecting to the Smpte 310M interfaceConnecting to the Smpte 310M interface DVB-SPI TxConfiguring the software Configuring the softwarePage Configuring the software Select the Rx tab Select the Tx tabClose the dialog Smpte 310M interface specifications Between consecutive packetsCables on all interfaces Release Notes Release Notes