Agilent Technologies SMPTE 310M manual MPEGscope Portable and Portable Lite

Page 20

MPEGscope Portable and Portable Lite

MPEGscope Portable and Portable Lite

This section explains how to install the SMPTE 310M interface into the MPEGscope Portable or Portable Lite models. You will install the interface into slot 2, the optional line interface slot, illustrated below.

E6300C MPEGscope Portable platform

slot 1—Real-time Analyzer card

slot 2—optional interface slot

slot 3—MPEGscope main card

slot 4—SCSI card

slot 5—external display and LAN card

12

Image 20
Contents Smpte 310M Interface Installation Guide +61-3-8877-8633 Copyright Warranty MPEGscopeManual Name Safety Symbols Indicates that antistatic precautions should be takenCertification Additional Information for Test and Measurement EquipmentSymboles de sécurité AvertissementCet instrument est conforme aux IiiPage Contents Contents-1Page Interface Installation Guide E6292-94000 Interface Printed Circuit Assembly E6292-66501Introduction IntroductionLocation Number MPEGscope Plus and MPEGscope Lite MPEGscope Plus and MPEGscope LiteRemove the cover MPEGscope Plus and MPEGscope Lite Remove optional interface MPEGscope Plus and MPEGscope Lite Install Smpte interface Install the Real-time Remove the blank faceplateAnalyzer card into slot Into slotReplace the cover Smpte 310M interface installed in slot MPEGscope Portable and Portable Lite MPEGscope Portable and Portable LiteRemove the cover Tabs Remove optional interface Install Smpte interface Page Plastic guide for GuideSmpte 310M interface installed in slot Connecting to the Smpte 310M interface Connecting to the Smpte 310M interfaceDVB-SPI Tx To system under test Connect the ScsiConfiguring the software Configuring the softwarePage Close the dialog Configuring the software Select the Rx tabSelect the Tx tab Cables on all interfaces Smpte 310M interface specificationsBetween consecutive packets Release Notes Release Notes