Agilent Technologies SMPTE 310M manual Introduction, Following items

Page 9

Introduction

Introduction

The E6292A SMPTE (Society of Motion Picture and Television Engineers) 310M interface is serial-to-parallel converter that receives a synchronous serial SMPTE signal and converts it to a DVB-Synchronous Parallel Interface (DVB-SPI) signal. This DVB-SPI signal is then output to the DVB-SPI receiver on the MPEGscope main card via an external cable which is included with your installation kit. The SMPTE 310M interface enables you to test the connectivity of multiplexers and transmission equipment carrying ATSC-compliant transport streams.

This manual shows how to install the SMPTE 310M interface card into your MPEGscope Plus, MPEGscope Lite, MPEGscope Portable, or MPEGscope Portable Lite test system. Each step provides photographs and easy-to- understand explanations. The manual also includes illustrations and physical specifications for the interface and connectors.

Installation kit

Before beginning, ensure that your SMPTE 310M interface installation kit contains

 

the following items:

 

SMPTE 310M

Interface Installation Guide (E6292-94000)

 

SMPTE 310M

Interface Printed Circuit Assembly (E6292-66501)

DVB-SPI Y-Adapter Cable (E6292-64300)

Size 15 Torx Head Screwdriver (8710-1622)

Antistatic Wrist Strap (9300-1408)

1

Image 9
Contents Smpte 310M Interface Installation Guide Copyright Warranty MPEGscope Manual Name+61-3-8877-8633 Indicates that antistatic precautions should be taken Safety SymbolsCertification Additional Information for Test and Measurement EquipmentAvertissement Symboles de sécuritéIii Cet instrument est conforme auxPage Contents-1 ContentsPage Interface Printed Circuit Assembly E6292-66501 Interface Installation Guide E6292-94000Introduction IntroductionLocation Number MPEGscope Plus and MPEGscope Lite MPEGscope Plus and MPEGscope LiteRemove the cover MPEGscope Plus and MPEGscope Lite Remove optional interface MPEGscope Plus and MPEGscope Lite Install Smpte interface Remove the blank faceplate Install the Real-timeAnalyzer card into slot Into slotReplace the cover Smpte 310M interface installed in slot MPEGscope Portable and Portable Lite MPEGscope Portable and Portable LiteRemove the cover Tabs Remove optional interface Install Smpte interface Page Guide Plastic guide forSmpte 310M interface installed in slot Connecting to the Smpte 310M interface Connecting to the Smpte 310M interfaceDVB-SPI Tx To system under test Connect the ScsiConfiguring the software Configuring the softwarePage Configuring the software Select the Rx tab Select the Tx tabClose the dialog Smpte 310M interface specifications Between consecutive packetsCables on all interfaces Release Notes Release Notes