Agilent Technologies SMPTE 310M manual MPEGscope Plus and MPEGscope Lite

MPEGscope Plus and MPEGscope Lite

MPEGscope Plus and MPEGscope Lite

This section explains how to install the SMPTE 310M interface into the MPEGscope Plus or Lite models. Normally, you will install the interface into slot 3, the optional line interface slot. If you have a different MPEGscope PC than the one illustrated below, you can still follow the procedure described in this section, as the affected cards are installed in the same slot positions.

MPEGscope Plus (E6277C)

slot 4—MPEGscope main card slot 3—optional line interface slot slot 2—Real-time Analyzer card slot 1—(empty)

slot 6—video card

slot 5—PCI LAN card

Note	If your MPEGscope is housed in a Kayak XU PC and you also have another
	optional interface (such as the ASI & Serial ECL (DHEI) interface), you can
	rearrange the cards so that both the SMPTE 310M and the optional interface are
	installed at the same time. This alternative configuration is shown on page 9.

3