Agilent Technologies SMPTE 310M manual Replace the cover

Page 18

MPEGscope Plus and MPEGscope Lite

Step 4: Replace the cover

2Slide the cover onto the computer, making sure that the two guides at the bottom of the case slide into the two rails at the base of the computer. Firmly slide the cover backwards into position.

1Ensure that the two latches on the front sides of the cover are lifted up.

3Lower the two latches on the front sides of the cover into place.

4Reconnect your mouse, keyboard, display, power cables, and LAN connection, then power on your MPEGscope.

10

Image 18

Contents Smpte 310M Interface Installation Guide Copyright Warranty MPEGscope Manual Name+61-3-8877-8633 Certification Safety SymbolsIndicates that antistatic precautions should be taken Additional Information for Test and Measurement EquipmentSymboles de sécurité AvertissementCet instrument est conforme aux IiiPage Contents Contents-1Page Introduction Interface Installation Guide E6292-94000Interface Printed Circuit Assembly E6292-66501 IntroductionLocation Number MPEGscope Plus and MPEGscope Lite MPEGscope Plus and MPEGscope LiteRemove the cover MPEGscope Plus and MPEGscope Lite Remove optional interface MPEGscope Plus and MPEGscope Lite Install Smpte interface Analyzer card into slot Install the Real-timeRemove the blank faceplate Into slotReplace the cover Smpte 310M interface installed in slot MPEGscope Portable and Portable Lite MPEGscope Portable and Portable LiteRemove the cover Tabs Remove optional interface Install Smpte interface Page Plastic guide for GuideSmpte 310M interface installed in slot DVB-SPI Tx Connecting to the Smpte 310M interfaceConnecting to the Smpte 310M interface To system under test Connect the ScsiConfiguring the software Configuring the softwarePage Configuring the software Select the Rx tab Select the Tx tabClose the dialog Smpte 310M interface specifications Between consecutive packetsCables on all interfaces Release Notes Release Notes