Agilent Technologies SMPTE 310M manual Plastic guide for, Guide

MPEGscope Portable and Portable Lite

Step 4: Replace the cover

screw

#1

3Place the back cover in position and replace the six back panel screws.

4Reconnect your display, power cables, and LAN connection, then power on your MPEGscope Portable.

screw

#2

tabs

screw

#1

screw

#4

1Insert tabs on the sides of the metal shield into the slots on the outer frame, then replace the two metal shield screws.

2	A plastic guide for the
	MPEGscope main card is
	located on the inside of the
	metal shield (by the third
	plastic guide screw). Use a
	small screwdriver to push
tabs	down the plastic guide until the
	edge of the MPEGscope main
	card is engaged in the slot on
	the guide.

screw

#3

screw

#2

screw	screw
#5	#6

18