Agilent Technologies SMPTE 310M manual

Page 30

Configuring the software

4Select the mode to use for your test.

2Select Configure.

3 Select the Mode tab.

For information about modes, press the Help button. You can also click on a field using the right mouse button.

22

Image 30
Contents Smpte 310M Interface Installation Guide Copyright Warranty MPEGscope Manual Name+61-3-8877-8633 Certification Safety SymbolsIndicates that antistatic precautions should be taken Additional Information for Test and Measurement EquipmentSymboles de sécurité AvertissementCet instrument est conforme aux IiiPage Contents Contents-1Page Introduction Interface Installation Guide E6292-94000Interface Printed Circuit Assembly E6292-66501 IntroductionLocation Number MPEGscope Plus and MPEGscope Lite MPEGscope Plus and MPEGscope LiteRemove the cover MPEGscope Plus and MPEGscope Lite Remove optional interface MPEGscope Plus and MPEGscope Lite Install Smpte interface Analyzer card into slot Install the Real-timeRemove the blank faceplate Into slotReplace the cover Smpte 310M interface installed in slot MPEGscope Portable and Portable Lite MPEGscope Portable and Portable LiteRemove the cover Tabs Remove optional interface Install Smpte interface Page Plastic guide for GuideSmpte 310M interface installed in slot DVB-SPI Tx Connecting to the Smpte 310M interfaceConnecting to the Smpte 310M interface To system under test Connect the ScsiConfiguring the software Configuring the softwarePage Configuring the software Select the Rx tab Select the Tx tabClose the dialog Smpte 310M interface specifications Between consecutive packetsCables on all interfaces Release Notes Release Notes