Ricoh PJ X3131, PJ X3241, PJ WX3131 Names of each part on the control panel and remote control

Page 16

Names of each part on the control panel and remote control

Control panel

(7) (6) (5)

(8)

(1)

(4) (3) (2)

		Remote Control
	(7)	(1)
	(8)	(1)
	(8)
	(9)	(2)

(10) (3)

(11)	Battery cover
	Battery cover
	(4)
	(5)
(12)
	(6)
(13)

	Name	: Main Function
Control panel
(1)	ENTER button	: Accepts the selected mode.
(2)	INPUT button	: Selects input. p.26
(3)	MENU button	: Displays menus. p.34
(4)	RETURN/MUTE button	: Goes back one screen. Also, cuts off the picture and
		sound temporarily. p.31
(5)	ON/STANDBY button/	: Turns the power on/off (standby). p.25
	ON/STANDBY indicator	: Displays whether power is on or off (standby). p.25
(6)	TEMP indicator	: Lights when internal temperature is too high. p.49
(7)	LAMP indicator	: Displays lamp mode. p.49
(8)	Selection button	: Menu selections and adjustments, volume control,
		Keystone adjustment, etc.
Remote control
(1)	ON/STANDBY button	: Turns the power on/off (standby). p.25
(2)	FREEZE button	: Pauses image. p.32
(3)	MENU button	: Displays menus. p.34

Image 16

Contents Data Projector Safety Precautions USA onlyEquipment Source of Light Power SourcesVentilation Cleaning Power Cord ProtectionHeat Water and MoistureImportant Safety Instructions Lightning stormsDo not place the product vertically Object and Liquid EntryDamage Requiring Service AccessoriesAttachments Replacement Parts Safety CheckDo not use the product in a closed installation location ServicingMoisture Condensation Place and Manner of InstallationAvoid Volatile Liquid Important Precautions LCD Panel CopyrightsDisposal Following information is only for EU-member statesOther Information Trademarks Notational Conventions Used in This ManualContents Maintenance OthersChecking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Preparations Names of the terminals on the rear panel Video Loading dry-cell batteries into the remote control Preparing and using the remote control Operating the remote Control Placement Placement StylesScreen As seen from above As seen from the side Projection Distance and SizePJ WX3131 Screen As seen from above As seen from the side Placement Connection Before connectionTurning the power on and off  Connecting the power cord Turning the power on Removing the lens cap Turning the power off PrecautionsPress the ON/STANDBY button again Replace the lens capTurn on the power Basic operationsActivate the connected device Press the Input buttonProjector placement angle adjustments Adjusting the screen size and focusAdjusting the volume with the buttons To fine adjust the angle, twist the foot adjusterBasic operations LCD PanelsUsing handy features  Using auto setting For computer input onlyPress the remote control’s Auto SET button Adjusting Keystone distortion ManuallyUsing handy features Press the remote control’s Resize buttonTo zoom out, press the remote control’s Resize Button  Resizing image Changing picture mode  Cutting off the picture and sound temporarilyMute  Changing screen sizePress the remote control’s Freeze button  Setting the password How to change password Freezing the image Freeze How to operate when password is On How to set password from Off to OnHow to set password from On to Off Using the menus  Setup using the Setting display The image adjustment menu FrequencyUsing the menus  The display setting menu Blackboard mode PrecautionDetailed description Screen size Up/down shiftDisplay style Reset logoLogo confirmation  The Default setting menu Power onLamp power Detailed description Auto input searchKey lock Detailed description Fan modeClosed Caption  Displaying Information Status display B/P ROperations Lamp replacement Unplug power cord Wait until lamp is sufficiently cooledRemove the outer lamp cover Remove the inner lamp coverReset the lamp time Pull out the lampMount the new lamp Replace the inner lamp coverAbout lamp replacement messages Lamp replacementUsed Lamps Air filter cleaning Unplug power cord Remove the air filterClean the filter Replace the air filter Lens cleaning Lens and main unit cleaning Main unit cleaning No power Power went out during usePower went out during use, or power won’t come on Trouble indicationsTroubleshooting If This Happens Check Remote control Doesn’t workSpecifications  List of general specificationsSpecification  Separately sold product List of supported signals RGB signals SVGA85 List of supported signals Component signals Specifications List of supported signals Video, S-Video signals  Main Commands  Control terminal Pin assignment  Interface formatEN US EN GB Y006-6300