Ricoh PJ X3241, PJ X3131, PJ WX3131 owner manual Names of the terminals on the rear panel, Video

Page 18

Names of the terminals on the rear panel

(1)

(2)

(3)

(4)

(5)

(6)(7)

(8)

(9)

	Name	: Main Function
(1)	AUDIO IN terminal	: Input audio signals from a computer or video equipment.
		(Multiple use for COMPUTER 1 IN/2 IN, VIDEO and
		S-VIDEO)
(2)	S-VIDEO terminal	: Input S video signals from video equipment.

(3)COMPUTER 1 IN (Y/PB/PR 1) terminal

:Input analog RGB signal from a computer, or a component video signal (Y/PB/PR) from video equipment.

(4)COMPUTER 2 IN (Y/PB/PR 2) terminal/MONITOR OUT terminal

:Inputs analog RGB signal from a computer

or a component video signal (Y/PB/PR) from video equipment.

It can also be used as MONITOR OUT terminal by the switch of (5).

(5)	Switch	: Switches between COMPUTER 2 IN and MONITOR OUT.
(6)	AC IN socket	: Connects the supplied power cord here.
(7)	AUDIO OUT terminal	: Outputs audio signals.
(8)	VIDEO terminal	: Input video signals from video equipment.
(9)	CONTROL terminal	: When operating the projector via a computer, connect this
		to the controlling computer’s RS-232C port. p.55

18

Image 18

Contents Data Projector Safety Precautions USA onlyEquipment Power Sources Source of LightVentilation Heat CleaningPower Cord Protection Water and MoistureDo not place the product vertically Important Safety InstructionsLightning storms Object and Liquid EntryAccessories Damage Requiring ServiceAttachments Do not use the product in a closed installation location Replacement PartsSafety Check ServicingPlace and Manner of Installation Moisture CondensationAvoid Volatile Liquid Disposal Important Precautions LCD PanelCopyrights Following information is only for EU-member statesOther Information Trademarks Notational Conventions Used in This ManualContents Maintenance OthersChecking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Preparations Names of the terminals on the rear panel VideoPreparing and using the remote control  Loading dry-cell batteries into the remote control Operating the remote Control Placement Placement StylesProjection Distance and Size Screen As seen from above As seen from the sidePJ WX3131 Screen As seen from above As seen from the side Placement Connection Before connection Turning the power on Turning the power on and off Connecting the power cord Removing the lens capPress the ON/STANDBY button again  Turning the power offPrecautions Replace the lens capActivate the connected device Turn on the powerBasic operations Press the Input buttonAdjusting the volume with the buttons Projector placement angle adjustmentsAdjusting the screen size and focus To fine adjust the angle, twist the foot adjusterBasic operations LCD PanelsPress the remote control’s Auto SET button Using handy features Using auto setting For computer input only Adjusting Keystone distortion ManuallyTo zoom out, press the remote control’s Resize Button Using handy featuresPress the remote control’s Resize button  Resizing imageMute  Changing picture mode Cutting off the picture and sound temporarily  Changing screen size Setting the password How to change password Press the remote control’s Freeze button Freezing the image Freeze How to set password from Off to On How to operate when password is OnHow to set password from On to Off Using the menus  Setup using the Setting display The image adjustment menu FrequencyUsing the menus  The display setting menu Detailed description Screen size Blackboard modePrecaution Up/down shiftReset logo Display styleLogo confirmation Lamp power  The Default setting menuPower on Detailed description Auto input searchDetailed description Fan mode Key lockClosed Caption  Displaying Information Status display B/P ROperations Remove the outer lamp cover Lamp replacementUnplug power cord Wait until lamp is sufficiently cooled Remove the inner lamp coverMount the new lamp Reset the lamp timePull out the lamp Replace the inner lamp coverLamp replacement About lamp replacement messagesUsed Lamps Clean the filter Air filter cleaningUnplug power cord Remove the air filter Replace the air filterLens and main unit cleaning  Lens cleaning Main unit cleaning Power went out during use, or power won’t come on No powerPower went out during use Trouble indicationsTroubleshooting If This Happens Check Remote control Doesn’t workSpecification Specifications List of general specifications  Separately sold product List of supported signals RGB signals SVGA85Specifications  List of supported signals Component signals List of supported signals Video, S-Video signals  Pin assignment  Main Commands Control terminal  Interface formatEN US EN GB Y006-6300