Ricoh PJ X3241 Projector placement angle adjustments, Adjusting the screen size and focus, Front

Page 27

Notes

•When [Auto input search] is set to [Off] in the Default setting 1 menu p.40 (factory setting is [On]), the Input select menu appears if you press the INPUT button.

•If no signal is being output from the connected equipment, pressing the INPUT button does not change the input and “There is no other input signal.” message will appear.

5Projector placement angle adjustments

The placement angle and the height of the projected image can be adjusted by the foot adjuster.

6

7

1 Lift up the front of the projector to the desired angle, then press the foot adjuster release button upward.

The foot adjuster extends. Release the button to lock the position.

2 To fine adjust the angle, twist the foot adjuster.

•To stow the foot adjuster, hold up the projector while pressing the foot adjuster release button, then slowly lower the projector.

Note

•When [Auto keystone] is set to [On] in the Default setting 1 menu, the keystone distortion will automatically be corrected based on the projector placement angle. If you do not desire the automatic keystone correction, set [Auto keystone] to [Off].

Adjusting the screen size and focus

1 Use the zooming lever to adjust the screen size.

2Use the focusing lever to adjust the focus.

Front

Adjusting the volume with the buttons

The speaker volume can be adjusted when an audio signal is being input.

Operations

27

Image 27

Contents Data Projector USA only Safety PrecautionsEquipment Power Sources Source of LightVentilation Water and Moisture CleaningPower Cord Protection HeatObject and Liquid Entry Important Safety InstructionsLightning storms Do not place the product verticallyAccessories Damage Requiring ServiceAttachments Servicing Replacement PartsSafety Check Do not use the product in a closed installation locationPlace and Manner of Installation Moisture CondensationAvoid Volatile Liquid Following information is only for EU-member states Important Precautions LCD PanelCopyrights DisposalNotational Conventions Used in This Manual Other Information TrademarksContents Others MaintenanceChecking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Preparations Video Names of the terminals on the rear panelPreparing and using the remote control  Loading dry-cell batteries into the remote control Operating the remote Control Placement Styles PlacementProjection Distance and Size Screen As seen from above As seen from the sidePJ WX3131 Screen As seen from above As seen from the side Placement Before connection Connection Removing the lens cap Turning the power on and off  Connecting the power cord  Turning the power onReplace the lens cap  Turning the power offPrecautions Press the ON/STANDBY button againPress the Input button Turn on the powerBasic operations Activate the connected deviceTo fine adjust the angle, twist the foot adjuster Projector placement angle adjustmentsAdjusting the screen size and focus Adjusting the volume with the buttonsLCD Panels Basic operationsAdjusting Keystone distortion Manually Using handy features Using auto setting For computer input only Press the remote control’s Auto SET button Resizing image Using handy featuresPress the remote control’s Resize button To zoom out, press the remote control’s Resize Button Changing screen size  Changing picture mode Cutting off the picture and sound temporarily Mute Setting the password How to change password Press the remote control’s Freeze button Freezing the image Freeze How to set password from Off to On How to operate when password is OnHow to set password from On to Off  Setup using the Setting display Using the menusFrequency  The image adjustment menuUsing the menus  The display setting menu Up/down shift Blackboard modePrecaution Detailed description Screen sizeReset logo Display styleLogo confirmation Detailed description Auto input search  The Default setting menuPower on Lamp powerDetailed description Fan mode Key lockClosed Caption B/P R  Displaying Information Status displayOperations Remove the inner lamp cover Lamp replacementUnplug power cord Wait until lamp is sufficiently cooled Remove the outer lamp coverReplace the inner lamp cover Reset the lamp timePull out the lamp Mount the new lampLamp replacement About lamp replacement messagesUsed Lamps Replace the air filter Air filter cleaningUnplug power cord Remove the air filter Clean the filterLens and main unit cleaning  Lens cleaning Main unit cleaning Trouble indications No powerPower went out during use Power went out during use, or power won’t come onTroubleshooting Doesn’t work If This Happens Check Remote control Separately sold product Specifications List of general specifications SpecificationSVGA85  List of supported signals RGB signalsSpecifications  List of supported signals Component signals List of supported signals Video, S-Video signals  Interface format  Main Commands Control terminal  Pin assignmentEN US EN GB Y006-6300