Ricoh PJ X3131 Specifications,  List of general specifications,  Separately sold product

Page 52

Specifications

List of general specifications

 

Item

Specification

Consumption Power

270 W

Weight

X3131/WX3131: 1.8 kg

X3241: 1.9 kg

 

 

 

External Dimensions

X3131/WX3131: 272 × 82 × 189 mm (W × H × D)

(including protruding parts)

X3241: 295 × 82 × 196 mm (W × H × D)

Cabinet material

PC+ABS resin and PC resin (Some parts including Mg alloy)

Conditions for usage environment

Temp: 5°C to 35°C; relative humidity: 30% to 70%

 

 

Display method

3-panel transmission

 

 

 

X3131: 0.63 type

 

 

Panel size

WX3131: 0.59 type

LCD Panel

 

X3241: 0.70 type

 

 

Drive system

TFT active matrix

 

 

Picture elements

X3131/X3241: 786,432 pixels (1024 H × 768 V)

 

 

WX3131: 1,024,000 pixels (1280 H × 800 V)

Lens

X3131/WX3131: F=1.7 ~ 1.87 f=19.2 ~ 23.00 mm

X3241: F=1.6 ~ 1.76 f=21.5 ~ 25.80 mm

 

 

 

Lamp

High-pressure mercury lamp (180 W)

Projection screen size

30-300 inches

 

 

 

X3131: 0.89 m ~ 10.93 m

Projection distance

WX3131: 0.94 m ~ 11.58 m

 

 

 

X3241: 0.89 m ~ 10.94 m

Speaker

1 W (Mono)

terminal

COMPUTER 1 IN terminal

Mini D sub 15 pin RGB / Y/PB/PR (dual use)

COMPUTER 2 IN terminal

Mini D sub 15 pin RGB / Y/PB/PR/MONITOR OUT

 

 

(multiple use)

S-VIDEO terminal

Mini DIN 4 pin

Connection

VIDEO terminal

RCA Pin Jack, 1 V (p-p), 75 Ω

AUDIO IN terminal

3.5 mm dia. stereo mini-jack: 1.5 V (rms), 22 kΩ or more

COMPUTER 1 IN, 2 IN/VIDEO/S-VIDEO (multiple use)

 

 

AUDIO OUT terminal

3.5 mm dia. stereo mini-jack

 

CONTROL terminal

D sub 9 pin (RS-232C)

Notes

This model complies with the above specifications.

Designs and specifications are subject to change without notice.

This model may not be compatible with features and/or specifications that may be added in the future.

Separately sold product

PJ Replacement Lamp Type1

PJ Replacement Air filter Type1

52

Image 52
Contents Data Projector Safety Precautions USA onlyEquipment Source of Light Power SourcesVentilation Cleaning Power Cord ProtectionHeat Water and MoistureImportant Safety Instructions Lightning stormsDo not place the product vertically Object and Liquid EntryDamage Requiring Service AccessoriesAttachments Replacement Parts Safety CheckDo not use the product in a closed installation location ServicingMoisture Condensation Place and Manner of InstallationAvoid Volatile Liquid Important Precautions LCD Panel CopyrightsDisposal Following information is only for EU-member statesOther Information Trademarks Notational Conventions Used in This ManualContents Maintenance OthersChecking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Preparations Names of the terminals on the rear panel Video Loading dry-cell batteries into the remote control Preparing and using the remote control Operating the remote Control Placement Placement StylesScreen As seen from above As seen from the side Projection Distance and SizePJ WX3131 Screen As seen from above As seen from the side Placement Connection Before connectionTurning the power on and off  Connecting the power cord Turning the power on Removing the lens cap Turning the power off PrecautionsPress the ON/STANDBY button again Replace the lens capTurn on the power Basic operationsActivate the connected device Press the Input buttonProjector placement angle adjustments Adjusting the screen size and focusAdjusting the volume with the buttons To fine adjust the angle, twist the foot adjusterBasic operations LCD PanelsUsing handy features  Using auto setting For computer input onlyPress the remote control’s Auto SET button Adjusting Keystone distortion ManuallyUsing handy features Press the remote control’s Resize buttonTo zoom out, press the remote control’s Resize Button  Resizing image Changing picture mode  Cutting off the picture and sound temporarilyMute  Changing screen sizePress the remote control’s Freeze button  Setting the password How to change password Freezing the image Freeze How to operate when password is On How to set password from Off to OnHow to set password from On to Off Using the menus  Setup using the Setting display The image adjustment menu FrequencyUsing the menus  The display setting menu Blackboard mode PrecautionDetailed description Screen size Up/down shiftDisplay style Reset logoLogo confirmation  The Default setting menu Power onLamp power Detailed description Auto input searchKey lock Detailed description Fan modeClosed Caption  Displaying Information Status display B/P ROperations Lamp replacement Unplug power cord Wait until lamp is sufficiently cooledRemove the outer lamp cover Remove the inner lamp coverReset the lamp time Pull out the lampMount the new lamp Replace the inner lamp coverAbout lamp replacement messages Lamp replacementUsed Lamps Air filter cleaning Unplug power cord Remove the air filterClean the filter Replace the air filter Lens cleaning Lens and main unit cleaning Main unit cleaning No power Power went out during usePower went out during use, or power won’t come on Trouble indicationsTroubleshooting If This Happens Check Remote control Doesn’t workSpecifications  List of general specificationsSpecification  Separately sold product List of supported signals RGB signals SVGA85 List of supported signals Component signals Specifications List of supported signals Video, S-Video signals  Main Commands  Control terminal Pin assignment  Interface formatEN US EN GB Y006-6300