Ricoh PJ X3241, PJ X3131 Lens and main unit cleaning,  Lens cleaning,  Main unit cleaning

Page 48

Lens and main unit cleaning

WARNING

•Request cleaning and maintenance of a ceiling-mounted unit from your sales representative. Attempting to clean or replace the lamp in a high location by yourself may cause you to fall, resulting in injury.

Lens cleaning

•Clean the lens with a commercially available blower and/or lens cleaner.

•The lens is easily scratched, so do not rub it with hard objects, or strike it.

Main unit cleaning

•Unplug the power cord before cleaning the main unit.

•Wipe dirt off the main unit gently with a soft cloth.

•Do not wipe the main unit with a damp cloth. Doing so may allow water to get inside, resulting in an electric shock or unit failure.

•Do not use benzene, thinner and the like as they may deform or discolor the unit or damage the paint surface.

•Do not use a chemically saturated cloth.

Image 48

Contents Data Projector Safety Precautions USA onlyEquipment Power Sources Source of LightVentilation Cleaning Power Cord ProtectionHeat Water and MoistureImportant Safety Instructions Lightning stormsDo not place the product vertically Object and Liquid EntryAccessories Damage Requiring ServiceAttachments Replacement Parts Safety CheckDo not use the product in a closed installation location ServicingPlace and Manner of Installation Moisture CondensationAvoid Volatile Liquid Important Precautions LCD Panel CopyrightsDisposal Following information is only for EU-member statesOther Information Trademarks Notational Conventions Used in This ManualContents Maintenance OthersChecking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Preparations Names of the terminals on the rear panel VideoPreparing and using the remote control  Loading dry-cell batteries into the remote control Operating the remote Control Placement Placement StylesProjection Distance and Size Screen As seen from above As seen from the sidePJ WX3131 Screen As seen from above As seen from the side Placement Connection Before connectionTurning the power on and off  Connecting the power cord Turning the power on Removing the lens cap Turning the power off PrecautionsPress the ON/STANDBY button again Replace the lens capTurn on the power Basic operationsActivate the connected device Press the Input buttonProjector placement angle adjustments Adjusting the screen size and focusAdjusting the volume with the buttons To fine adjust the angle, twist the foot adjusterBasic operations LCD PanelsUsing handy features  Using auto setting For computer input onlyPress the remote control’s Auto SET button Adjusting Keystone distortion ManuallyUsing handy features Press the remote control’s Resize buttonTo zoom out, press the remote control’s Resize Button  Resizing image Changing picture mode  Cutting off the picture and sound temporarilyMute  Changing screen size Setting the password How to change password Press the remote control’s Freeze button Freezing the image Freeze How to set password from Off to On How to operate when password is OnHow to set password from On to Off Using the menus  Setup using the Setting display The image adjustment menu FrequencyUsing the menus  The display setting menu Blackboard mode PrecautionDetailed description Screen size Up/down shiftReset logo Display styleLogo confirmation  The Default setting menu Power onLamp power Detailed description Auto input searchDetailed description Fan mode Key lockClosed Caption  Displaying Information Status display B/P ROperations Lamp replacement Unplug power cord Wait until lamp is sufficiently cooledRemove the outer lamp cover Remove the inner lamp coverReset the lamp time Pull out the lampMount the new lamp Replace the inner lamp coverLamp replacement About lamp replacement messagesUsed Lamps Air filter cleaning Unplug power cord Remove the air filterClean the filter Replace the air filterLens and main unit cleaning  Lens cleaning Main unit cleaning No power Power went out during usePower went out during use, or power won’t come on Trouble indicationsTroubleshooting If This Happens Check Remote control Doesn’t workSpecifications  List of general specificationsSpecification  Separately sold product List of supported signals RGB signals SVGA85Specifications  List of supported signals Component signals List of supported signals Video, S-Video signals  Main Commands  Control terminal Pin assignment  Interface formatEN US EN GB Y006-6300