
Quick Dial
Note
❒Under rare circumstances, gar- bled characters may appear
during name registration if you use the {Pause/Redial} key to display the fax number of par- ties located in other countries. If this happens, simply delete the
garbled characters using 0 or 1 and the {Clear/Stop} keys, and then go on to enter the name.
K Press the {OK} key.
The name is programmed.
L Press 0 or 1 to select "On" or "Off".
Note
❒Label insertion allows the re- ceiver's name that is pro - grammed in Quick Dial or Speed Dial to be printed on the fax when it is received at the other end. See p.8 “Label Inser- tion”, Advanced Features.
M Press the {OK} key.
If you want to store another Quick Dial, go to step E.
N Press the {User Tools} key to re- turn to standby display.
Deleting
The following procedure describes how to delete fax numbers registered in Quick Dial keys.
Limitation
❒When a Quick Dial key is being used for a standby Memory Trans-
mission, the message " This Dial
|
|
is in Use. Cannot Delete. " is | 3 |
| |
shown and you cannot delete the |
|
| |
destination for this key. |
|
A Press the {User Tools} key.
B Press 0 or 1 until " 2. Fax Fea- tures " is displayed.
C Press the {OK} key.
Confirm that " 1. Program / Delete " is displayed.
D Press the {OK} key.
49