Samsung CLX-216x manual Finding more information, Selecting a location, Clearance space

Finding more information

You can find information for setting up and using your machine from the following resources, either printed or onscreen.

Quick Install Guide	Provides information on setting up your
	machine and, therefore, be sure to follow the
	instructions in the guide to get the machine
	ready.

Online	Provides you with step-by-step instructions for
User’s Guide	using your machine’s full features, and
	contains information for maintaining your
	machine, troubleshooting, and installing
	accessories.

This user’s guide also contains the Software Section providing you with information on how to print documents with your machine on various operating systems, and how to use the supplied software utilities.

Note

You can access the user’s guides in other languages from the Manual folder on the Printer software CD.

Network Printer	If your machine is not equipped with a
	network interface, this CD is not provided.
User’s Guide
	Contained on the network utilities CD,
	provides you with information on setting up
	and connecting your machine to a network.
Printer Driver	Provides you with help information on printer
Help	driver properties and instructions for setting up
	the properties for printing. To access a printer
	driver help screen, click Help from the printer
	properties dialog box.
Website	If you have Internet access, you can get help,
	support, printer drivers, manuals, and order
	information from the Samsung website,
	www.samsungprinter.com.

Selecting a location

Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays.

The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table.

Clearance space

• Front: 482.6 mm

(enough space so that the paper tray can be removed)

•Back: 100 mm (enough space for ventilation)

•Right: 100 mm (enough space for ventilation)

•Left: 100 mm (enough space for ventilation)

Note

When you move the printer, do not tilt or turn it upside down. Or the inside of the printer may be contaminated by toner, which can cause damage to the printer or bad printing quality.

Place the machine on a flat and stable surface for not letting it lean more than 2 mm (0.08 inches). Otherwise, it may affect the printing quality.

1.5 <Introduction>