Printing a demo page
Print a demo page to make sure that the machine is operating correctly.
To print a demo page:
In ready mode, press and hold the OK button for about 2 seconds.
Altitude adjustment
The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine to the best print quality or best quality of print.
Before you set the altitude value, find the altitude where you are using the machine.
Value
1 High 3
2 High 2
3 High 1
4 Normal
0
1Ensure that you have installed the printer driver with the provided Printer Software CD.
2
You can also click Smart Panel on the status bar in Mac OS X.
3Click Printer Setting.
4Click Settings > Altitude Adjustment. Select the appropriate value from the dropdown list, and then click Apply.
Note
If your machine is connected to a network, SyncThru Web Service screen appears automatically. Click Machine Settings
>Setup (or Machine Setup) > Altitude Adj. Select the appropriate altitude value, and then click Apply.
1.6 <Introduction>