Maintenance
If you are getting streaks or spots on your print, you may run the maintenance.
Cleaning Drum
This procedure removes excess toner on the OPC drum.
1.Make sure that paper is loaded in the automatic feeder.
2.Press Menu, and Maintenance on the one-touch keypad.
CLEAN DRUM ?
3.Press Enter. The machine automatically pulls in a sheet of paper, and prints out. The toner particles on the OPC drum surface is fixed to the paper.
Adjust Shading
This procedure makes a new shading reference value.
1.Make sure that white paper is loaded in the automatic feeder. It is recommended to load a
2.Press Menu, and Maintenance on the
3. Press ¹ or to select `ADJUST SHADING?Õ option.
4.Press Enter.
5.Press 1 to confirm your selection.
2 Operation
Other Functions 2.41