Samsung FX 505 manual Storing Numbers for Speed Dialing, Using Address Label

S t o r i n g O n e - T o u c h & S p e e d D i a l N u m b e r s c o n t i n u e d

Storing Numbers for Speed Dialing

TO begin storing numbers, press [FUNCTION], then [SPEED]. Follow the steps below.

Window Message Your Response

Enter a 2-digit number (01-20) under which you want to assign the telephone or fax number.

If the window says [CANCEL ? (Y/N)], a number is already assigned to the location. Press [YES] to replace that number and continue, or [NO] to start over with a different location.

Enter the telephone or fax number. You can use any key on the dial pad, including [ * ] and [#].

Pressing [REDIAL/PAUSE] between numbers adds a 2- second pause each time it is pressed. Hyphen symbol appears on the window at the pause entry.

If you make a mistake while entering a number, press [NO] to backspace and correct.

When the correct number appears on the window, press

[YES].

If you want to identify the telephone number with a name, enter the desired name as described in “How to Enter Name” on page 15.

When the desired name appears on the window, press

[YES].

If you do not want to enter a destination name, just press [YES] without entering name.

To use the memory search function, it is recommended to enter name.

To store other numbers, repeat the steps from beginning.

Using Address Label

There is an address label paper which comes together with your unit. As you store numbers into one-touch keys, make a note of the number on the address label to remind you of what telephone number or fax number is stored in each position.

Write information on the label, peel it off, then attach it to the proper position over the corresponding one-touch key, as shown below.

If desired, you can use 5 additional white labels which are not designated by printed number.