JVC HR-XV1EK manual Setting the Time and Date Manually, Clock Dayset

Setting the Time and Date Manually

You must set the date and time manually for timer recordings if Automatic tuning process did not set them correctly.

Notes:

•The AUTO TIME function adjusts the clock only if the error is within 5 minutes.

•The VCR automatically adjusts the clock setting for Daylight Saving Time once you set AUTO TIME to ON.

Preparation

•Turn on the TV, and select the VCR channel on TV.

•Make sure TV/VCR/DVD switch has been slided to VCR/ DVD. Then press VCR to select the VCR mode. (The VCR indicator will light)

Example: Setting the clock to 11:30, 26 Oct. 2002.

1 Press SET UP MENU. Press ▲ or ▼ to select the SYS- TEM SETUP. Then press

OK.				TIMER REC SET
The step-2 will appear				AUTO REPEAT						OFF
				VCR SETUP
when clock is not set.				CHANNEL SETUP
				SYSTEM SETUP
			SELECT :
			ENTER					: OK
			EXIT					: MENU
2 Press ▲ or ▼ to select				SYSTEM SETUP
the CLOCK SET. Then
press OK.					CLOCK SET
					LANGUAGE/SPRACHE/LANGUE
				SELECT :
				ENTER				: OK	000:0
				EXIT			YEAR
								: MENU
							TIME
Press	or	repeatedly	SELECTAUTOTIME						ON
3 until 26 appears. Then			OK					:OK	EXIT:MENU
			CLOCKDAYSET						6WED
press ▼ to continue.							MONTH		21
• In case of an error,			CLOCK DAYSET						26SAT
							MONTH
4 Set the month, year, hour and minute in the same
again.						.	AUTOTIME		ON
way as in step 3. Then press
			SELECT					:OK	EXIT:MENU
press ▲ to go back to			OK
							YEAR		002
one step and enter							TIME		11:30
5 Press	or	to select AUTO TIME ON or OFF.

The VCR automatically corrects the clock setting every hour once you set AUTO TIME to ON.

6 Press SET UP MENU repeatedly until the TV picture appears on the screen.

7 The clock will begin operation.

15