NICAM Stereo Recording and Playback
This DVD/VCR is capable of recording sound in
Preparation:
•Turn ON the TV and select the VCR channel on TV.
•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light)
to record NICAM programmes, select NICAM "AUTO" as follows.
NICAM stereo sound reception:
1 Press SET UP MENU. Press
▲or ▼ to select VCR SETUP. Then press OK.
2 Press ▲ or ▼ to select NICAM. Then press / or OK to select [AUTO].
TIMER REC SET
AUTO REPEAT | [OFF] |
VCR SETUP
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : OK
EXIT : MENU
VCR SETUP |
| |
| NICAM | [AUTO] |
| ||
| AUDIO MIX | [OFF] |
PLAYBACK SHARPNESS
SELECT : /
ENTER : OK
EXIT : MENU
3 Press the SET UP MENU repeatedly until the TV picture appears.
NICAM programmes are divided into 4 types as shown below.
Note:
When listening to a stereo broadcast or playing back a tape
NICAM STEREO broadcast "NICAM ST" illuminates when a NICAM STEREO broadcast signal is received.
NICAM MONO A broadcast "NICAM M1" illuminates when a NICAM MONO A broadcast signal is received.
NICAM MONO A B broadcast "NICAM M1/2" illuminates when a NICAM MONO A and MONO B broadcast signal is received.
NICAM OFF
It will be displayed for the NICAM signal when the "NICAM [OFF]" is selected in menu screen.
NICAM ST
NICAM M1
NICAM M1/2
NICAM OFF
32