JVC HR-XV1EK manual Counter Display, Zero Return function, DISPLAY-button

Counter Display

ZERO RETURN function

This function makes tape-rewinding stop at the counter 00:00:00 position automatically.

Preparation:

• Turn ON the TV and select the VCR channel on TV.

• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light)

1 Press OSD.			00:04:38SP
		12:00SUN	CH2
The counter display shows the
tape running time during		STEREO
playback or recording.
The Recorder will indicate REC
during recording for itself.
	VCR
			00:00:00SP
2 Press C.RESET at the desired
		12:00SUN	CH2
tape position.
The counter display will be reset		STEREO
to the "00:00:00" position (e.g.
the beginning of recording).
	VCR

3 Press 3 when playback or recording is finished. Press ZERO RETURN.

The tape will be rewinded or fast forwarded and automatically stop at the ”00:00:00” position.

4 Press OSD once again to make the all indicator disappear.

The DISPLAY-button

Press DISPLAY during the playback. The clock andVCR tape counter alternate with each other in the display.

Note:

•When you load a video cassette, the dis- play indication changes to "00:00".

•The counter display does not function on non-recorded (blank) sections of the tape. When you rewind, fast forward or play tapes through blank sections, the counter display stops.

VCR

Note:

You can set the tape counter to 00:00:00 with C.RESET anytime. Therefore, the counter display can also indicate 00:00:00, even when the tape counter does not reach its beginning yet. Even if the tape counter indicates 00:00:00, it can be rewinded moreover. If the tape was rewinded over the point of 00:00:00, the minus mark (–) appears in the counter display. Although the tape counter seems to forward when you press , in fact the tape is being rewinded. When the tape reaches the beginning, the tape-rewinding stops automatically.

22