JVC HR-XV1EK Duplicating a Video Tape, Connection with second Video recorder or Video camera

Duplicating a Video Tape

When you try to connect with a cable, make sure the power of both units have been turned off. Connect the recording unit with the TV. Therefore you can just watch what the recording unit is recording.

1 Load a blank cassette tape with the erase prevention tab intact into the recording DVD/VCR. Load the previously recorded cassette tape into the playback VCR or a video camera.

VCR

2 Use AUX or PR of the recording DVD/VCR to select the "A1", "A2" or "A3" instead of the preset channel.

A1 = TV-RGB/Composite Scart Socket

A2 = VCR/DECODER Scart Socket

A3 = Front AV jacks

3 While holding 2, press and then 4of Recording unit.

4 Press PLAY-button and then PAUSE/STILL-button of Playback unit. Now you can see the still picture of the scene that you wish to duplicate.

5 Pressing. 4of both units simultaneously to start the Duplicat-

Note:

Before starting the duplicating process, select the proper

tape speed using . For a pre-recorded tape the correct tape speed will be set automatically during playback.

Connection with second Video recorder or Video camera

OR

Playback unit

Recording unit

(not supplied)

Press AUX on the recording unit repeatedly until A3 appears.

Playback on camera

(not

supplied)

Duplicating a disc material onto a video tape

You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.

If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark “” will appear on the screen for approx. 4 seconds. See page 38 for more information about the DVD playback.

Preparation:

•Load a cassette tape with the erase prevention tab intact.

•Select the tape speed in the VCR mode. (see P.24)

•Load a disc you wish to duplicate.

1 Press DVD to select the DVD mode. (The DVD indi- cator will light)

2 Press to start the disc playback.

3 During disc playback, while holding 2, press .

Note:

You can set the duplicating time using the ITR-function. At step 3 above press 2 repeatedly until the desired duplicating time appears on the screen.(P.26)

35