Playback procedure
Preparation:
•Turn ON the TV and set to the video input mode.
•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then
press DVD to select the DVD mode. (The DVD indicator will light)
1
2
3
Press OPEN/CLOSE.
The disc tray will open.
Place a disc onto the tray.
Hold the disc, position it with the printed label side up, align it with the guides, and place it in its proper position.
Press or OPEN/CLOSE. The disc tray closes automati-
cally.
On the screen, changes to “ ” and then playback will
commence.
•A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, press , , , or OK to operate a menu feature.
4 Press 3 to end playback. |
|
• The DVD/VCR memorizes the stopped point, depending on | |
the disc. “To Return To The Last Scene Viewed, Press Play. To | |
Disable This Operation, Press STOP Again.” appears on the | |
screen for approx. 4 seconds. “ ” will continue blinking in the | |
display until the playback is stopped completely. Press | to |
resume playback (from the scene point). |
|
•If you press 3 again (“ 3” appears on the screen) or unload the disc, the DVD/VCR will clear the stopped point.
5 Then press OPEN/CLOSE. The disc tray opens.
Remove the disc and press , (POWER).
The disc tray closes automatically and DVD/VCR turns off.
NOTES:
•If a
•Some discs may take a minute or so to start playback.
•A “Prohibition” symbol may appear at the upper right of the screen. This symbol means either the feature you tried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate a problem with the DVD/VCR.
•When you set a
•Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.
•When playing
38