Enterasys Networks 5H103-48, 5H102-48 manual Is enabled and there is a

Using LANVIEW

Table 4-1 LANVIEW LEDs (Continued)

LED Color State Recommended Action

TX	Off	Port enabled, and no
(Transmit)		activity.
		Should flash green every
		two seconds indicating
		BPDUs being sent if STA
		is enabled and there is a
		valid link.

1.Ensure that the STA is enabled and that there is a valid link.

2.Contact Enterasys Networks for technical support.

	Green	Flashing. Indicates	None.
		activity. Rate indicates
		data rate.
	Amber	Blinking. Port may be	1. Ensure that the port is not disabled.
		disabled due to Spanning	2. Contact Enterasys Networks for
		Tree.	technical support.
	Red	Flashing. Indicates	None, unless there is a high amount of
		collision rate.	activity. In this case, check for network
			configuration problems or a defective
			device.
		Solid. Diagnostic failure.	Contact Enterasys Networks for technical
			support.
Speed	Off	Port is in 10 Mbps	None.
		(10BASE-T).
	Green	Solid. Port is in 100 Mbps	None.
		(100BASE-TX).

4-4Troubleshooting