Gefen EXT-HDMI1.3-CAT6-4X user manual Hdmi cable To Display CAT6 Out From Extender

Page 19

CONNECTING AND OPERATING THE

4X CAT6 EXTENDER FOR HDMI

How to Operate the 4x CAT6 Extender for HDMI

(Stand-alone Mode)

When the 4x CAT6 Extender for HDMI is used without an 4x4 Matrix, it can only be used as an HDMI extender.

The LED on the front panel will show which HDMI is active on the Sender unit.

Example: Connect a CAT-6 cable to CAT6 Out 2 and CAT6 In, between the Sender unit and Receiver unit.

HDMI cable To Display

CAT6 Out 2

from Extender

In 2

16

Image 19

Contents 4x CAT6 Extender For Hdmi Write To Asking for AssistanceTechnical Support Technical Support HoursContents How It Works IntroductionGefen Gefen 4x CAT6 Extender for HdmiOperation Notes Package Includes FeaturesSupported Hdmi 1.3 Features FeaturesSender Panel Layout CAT6 Output Jack Sender Panel DescriptionsReceiver Panel Layout Control Buttons Receiver Panel DescriptionsRMT-4-IR Remote Optional IR Remote DescriptionInstalling the RMT-4-IR Battery RMT-4-IR Remote InstallationSetting the IR Remote Channel on the RMT-4-IR RMT-4-IR Remote ConfigurationHow to Connect the 4x CAT6 Extender for Hdmi Matrix Mode Connecting the 4X CAT6 Extender for HdmiExample 1 Routing Input source 3 to Output display Connecting and Operating 4X CAT6 Extender for HdmiConnecting and Operating the 4X CAT6 Extender for Hdmi Connecting and Operating the 4X CAT6 Extender for Hdmi RMT-4-IR Button Source Hdmi cable To Display CAT6 Out From Extender Connecting and Operating the 4X CAT6 Extender for Hdmi Receiver Unit bottom DIP Switch ConfigurationDIP Switch Location Matrix Mode / Stand-alone Mode Default settings for DIP switchesDIP 3 / DIP 4 IR Remote Channel DIP 2 Deep ColorRS-232 Serial Control Interface RS-232 SettingsBinary Table Use the RS-232 controller to send the following command Routing Sources using RS-232 Receiver Unit Matrix ModeCommand RS-232 Serial CommandsFunctions Syntax Fiber Optic Extender Status F0 Command #RMTIRADD Function #LOCKPOWER FunctionView Matrix Status IP ControlIP Configuration Backup / Restore Power Management Pin Color Network Cable Wiring DiagramFirmware Update Procedure Firmware UpdateFirmware Update Specifications Product Registration WarrantyLicensing Page Rev C3 Nordhoff St., Chatsworth CA