Gefen EXT-HDMI1.3-CAT6-4X user manual Specifications

Page 35

SPECIFICATIONS

Video Ampliﬁer Bandwidth	225 MHz
Input Video Signal	1.2 V p-p
Input DDC Signal	5V p-p (TTL)
Maximum Video Resolution	1080p / 1920 x 1200
HDMI Connector	Type A 19-pin
Link Connector	RJ-45 Shielded
Power Indicator (Sender / Receiver)	LED (red)
Source Indicators (Receiver)	LED (blue)
RS-232 Interface (Sender)	1x DB9 serial (F), 1x DB9 serial (M)
RS-232 Interface (Receiver)	1x DB9 serial (M)
Power Supply	24V DC (Sender), 5V DC (Receiver)
Power Consumption (Sender)	60 W (max.)
Power Consumption (Receiver)	10 W (max.)
Operating Temperature	0 - 40 °C
Sender Dimensions	17.0” W x 1.75” H x 4.5” D
Receiver Dimensions	7.5” W x 1.3” H x 3.5” D
Shipping Weight	11.8 lbs
Certiﬁcations	UL (power supply), RoHS, CE

32

Image 35

Contents 4x CAT6 Extender For Hdmi Write To Asking for AssistanceTechnical Support Technical Support HoursContents How It Works IntroductionGefen Gefen 4x CAT6 Extender for HdmiOperation Notes Package Includes FeaturesSupported Hdmi 1.3 Features FeaturesSender Panel Layout CAT6 Output Jack Sender Panel DescriptionsReceiver Panel Layout Control Buttons Receiver Panel DescriptionsRMT-4-IR Remote Optional IR Remote DescriptionInstalling the RMT-4-IR Battery RMT-4-IR Remote InstallationSetting the IR Remote Channel on the RMT-4-IR RMT-4-IR Remote ConfigurationHow to Connect the 4x CAT6 Extender for Hdmi Matrix Mode Connecting the 4X CAT6 Extender for HdmiExample 1 Routing Input source 3 to Output display Connecting and Operating 4X CAT6 Extender for HdmiConnecting and Operating the 4X CAT6 Extender for Hdmi Connecting and Operating the 4X CAT6 Extender for Hdmi RMT-4-IR Button Source Hdmi cable To Display CAT6 Out From Extender Connecting and Operating the 4X CAT6 Extender for Hdmi Receiver Unit bottom DIP Switch ConfigurationDIP Switch Location Matrix Mode / Stand-alone Mode Default settings for DIP switchesDIP 3 / DIP 4 IR Remote Channel DIP 2 Deep ColorBinary Table RS-232 SettingsRS-232 Serial Control Interface Use the RS-232 controller to send the following command Routing Sources using RS-232 Receiver Unit Matrix ModeFunctions Syntax RS-232 Serial CommandsCommand Fiber Optic Extender Status F0 Command #RMTIRADD Function #LOCKPOWER FunctionView Matrix Status IP ControlIP Configuration Backup / Restore Power Management Pin Color Network Cable Wiring DiagramFirmware Update Procedure Firmware UpdateFirmware Update Specifications Product Registration WarrantyLicensing Page Rev C3 Nordhoff St., Chatsworth CA