IP CONTROL
POWER MANAGEMENT
The POWER MANAGEMENT page is used to set optional +5V power on an input to power specific optional devices. The current status of this feature for each input can be viewed on this page. To set this feature for each input follow the steps below.
1.Select the +5V option, either “On” or “Off” for each desired input.
2.Click on the “Update” button to initiate the change(s).
Note: After this command is complete the VIEW MATRIX STATUS page will be displayed.
This page will automatically refresh every minute, however, at anytime the Refresh button can be pressed to refresh the status of the matrix.
28