Emerson specifications Rosemount 5300/5400 Series

Rosemount 5300/5400 Series

Manual Supplement

00809-0500-4530, Rev AA October 2010

	Register Name	Register Number	Note
			Secondary variable from slave 1
	Slave 1 SV	2104	represented in IEEE 754 format, using
			Floating Point Format Code 2.
			Tertiary variable from slave 1
	Slave 1 TV	2106	represented in IEEE 754 format, using
			Floating Point Format Code 2.
			Fourth variable from slave 1 represented
	Slave 1 FV (QV)	2108	in IEEE 754 format, using Floating Point
			Format Code 2.
Table 1-16. Output Variables for
Floating Point Format Code 3
	Register Name	Register Number	Note
			Bit information in bitfield:
			Bit 0: Invalid Measurement Slave 1 PV.
			Bit 1: Invalid Measurement Slave 1 SV.
			Bit 2: Invalid Measurement Slave 1 TV.
			Bit 3: Invalid Measurement Slave 1 FV.
	Slave 1 Status	2200	Bit 14: HART bus busy (slave in burst or
			other master present)
			Bit 15: HTM Task not running (option not
			available).
			Note: Bit 1-3 is set when Invalid
			Measurement of Slave 1 Non PV, i.e. all
			three bits are set simultaneously.
			Primary variable from slave 1
	Slave 1 PV	2202	represented in IEEE 754 format, using
			Floating Point Format Code 3.
			Secondary variable from slave 1
	Slave 1 SV	2204	represented in IEEE 754 format, using
			Floating Point Format Code 3.
			Tertiary variable from slave 1
	Slave 1 TV	2206	represented in IEEE 754 format, using
			Floating Point Format Code 3.
			Fourth variable from slave 1 represented
	Slave 1 FV (QV)	2208	in IEEE 754 format, using Floating Point
			Format Code 3.

1-28