Emerson 5400, 5300 specifications Specifications

Rosemount 5300/5400 Series

Manual Supplement

00809-0500-4530, Rev AA October 2010

SPECIFICATIONS

Table 1-26. Specifications

Power supply	8-30 Vdc (max. rating)
Power consumption	< 0.5 W (with HART address=1)
	< 1.2 W (incl. four HART slaves)
	Two-wire half duplex RS-485 Modbus. Use shielded
Signal wiring	twisted pair wiring, preferably with an impedance of 120Ω
	(typically 24 AWG), in order to comply with EIA-485
	standard and EMC regulations.
	The power supply cables must be suitable for the supply
Power supply cabling	voltage and ambient temperature, and approved for use
	in hazardous areas, where applicable.
Ground (common mode)	± 7 V
voltage limit
Bus termination	Standard RS-485 bus termination per EIA-485

See the Rosemount 5300 Series Reference Manual (Document No. 00809-0100-4530), and the Rosemount 5400 Series Reference Manual (Document No. 00809-0100-4026) for further specifications.

1-40