TV Operations
TV tuner functions
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor.
Watching a TV
1.Press the [FNC] button and select the TV mode.
2.Press the [BND] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles be- tween TV1 and TV2.
3.Press the [ 
] button or the [ 
] button to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cas- sette recorder (VCR) to the TV tuner input termi- nal.
1.Press the [RDM] button to select VTR.
2.To return to the TV broadcast, press the [RDM] button.
Tuning
There are 3 types of tuning mode available, Seek tuning, manual tuning and preset tuning.
Seek tuning
1.Press the [BND] button and select the desired TV band (TV1 or TV2).
∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available.
2.Press the [ 
] button or the [ 
] button to
automatically seek a station. Press the [ 
] button to automatically tune up the frequency band to the next available TV station; press
the [ 
] button to automatically tune down.
Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the fre- quency changes one step at a time. In quick tun- ing mode, you can quickly tune the desired fre- quency.
1.Press the [BND] button and select the desired band (TV1 or TV2).
∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” lights in the display and manual tun- ing is now available.
2.Tune into a station.
●Quick tuning:
Press and hold the [
] button or the [
] but- ton for 1 second or longer to tune in a station.
●Step tuning:
Press the [
] button or the [
] button to manually tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored
1.Press [BND] button and select the desired TV band (TV1 or TV2).
2.To recall a stored TV station, turn the [PRE- SET] knob either clockwise or counterclock- wise to select that station.
Manual memory
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press the [M] button.
“CH” is lit in the display.
3.Turn the [PRESET] knob either clockwise or counterclockwise to select the desired preseet memory.
4.Press and hold the [M] buttos for 2 seconds or longer to store that station into preset memory.
24 ADZ625